WORK INSTRUCTION FOR MORTISE DRILLING JIG ASSEMBLY
A. Take one black clamp and align its
screw with the jig's central hole.
B. To tighten the clamp in place,
use a
5
⁄
"
Allen key.
32
C. Repeat steps A & B to install other clamp.
Internet:
www.ilcounican.com
US & Canada:
ILCO UNICAN INC. , UNICAN Electronics Division
7301 Decarie Boulevard, Montreal, Quebec
H4P 2G7, Canada
Tel.: 800 906 4526 Fax: 800 490 3785
E-mail: hotelproducts@ilcounican.com
International:
Tel.: +1 514 735 5419
Fax: +1 514 735 1393
E-mail: intl-sales@ilcounican.com
Technical Support Hotline
Call 800 906 4526 (US & Canada) or (514) 340 9025
(International) from 8:30 AM to 9:00 PM Eastern Time,
Monday to Friday (except holidays).
Installation Jig Door Preparation Instructions
Solitaire 710, 710-II and SMART Series
Please read and follow all instructions carefully.
Since correct installation is critical, carefully check windows,
frame, door, etc. to ensure that the recommended procedures
®
will not cause any damage.
ILCO UNICAN is not responsible for any damage caused by installation.
• American & Slim Motorized Mortise
(AMM & SMM) Version
• American & Slim Mortise
(ASM & ESM) Version
(710 Series only)
®