Advertisement
Quick Links
WORK INSTRUCTION FOR MORTISE DRILLING JIG ASSEMBLY
A. Take one black clamp and align its
screw with the jig's central hole.
B. To tighten the clamp in place,
use a
5
⁄
"
Allen key.
32
C. Repeat steps A & B to install other clamp.
Internet:
www.ilcounican.com
US & Canada:
ILCO UNICAN INC. , UNICAN Electronics Division
7301 Decarie Boulevard, Montreal, Quebec
H4P 2G7, Canada
Tel.: 800 906 4526 Fax: 800 490 3785
E-mail: hotelproducts@ilcounican.com
International:
Tel.: +1 514 735 5419
Fax: +1 514 735 1393
E-mail: intl-sales@ilcounican.com
Technical Support Hotline
Call 800 906 4526 (US & Canada) or (514) 340 9025
(International) from 8:30 AM to 9:00 PM Eastern Time,
Monday to Friday (except holidays).
Installation Jig Door Preparation Instructions
Solitaire 710, 710-II and SMART Series
Please read and follow all instructions carefully.
Since correct installation is critical, carefully check windows,
frame, door, etc. to ensure that the recommended procedures
®
will not cause any damage.
ILCO UNICAN is not responsible for any damage caused by installation.
• American & Slim Motorized Mortise
(AMM & SMM) Version
• American & Slim Mortise
(ASM & ESM) Version
(710 Series only)
®
Advertisement
Summary of Contents for ILCO Unican DT-509275 AMM
- Page 1 (International) from 8:30 AM to 9:00 PM Eastern Time, ® will not cause any damage. Monday to Friday (except holidays). ILCO UNICAN is not responsible for any damage caused by installation. ®...
- Page 2 American Mortise (part # 138-509876) ⁄ ” (35 mm) above the axis of Drill the two mounting holes for • DT-509275 AMM, with 1 ⁄ ” (32 mm) mortise face plate rotation of the lock lever handle. the mortise into the edge of the •...