Pannier Single Post Frameless Assembly And Installation Instructions

Pannier Exhibit Base
Assembly and Installation
Instructions
Installing a Pannier exhibit base is as easy as 1, 2, 3.
Step 1 – Inspect and Organize
As soon as your shipment arrives inspect all pieces
and assembly components to make sure your delivery
is complete.
For each exhibit base, the following will be
included: (Figure 1)
A. Pedestal Leg(s)
B. Buttonhead Screws (Figure 2)
C. Panel Assembly
D. 5/32" Hex Head Wrench
Assembling and installing a Pannier Exhibit Base is a
straightforward process made even easier if two or
more people work together using the proper tools and
materials to complete the task.
Recommended tools and materials:
• Power or manual post-hole digger
• Shovel
• Wood braces
• Hammer
• Clamps
• Nails
• Plastic sheeting
• Cement
• Gravel
• Tamping bar
• Level
Single Pedestal
Figure 1
Page 1 of 2
(A) Pedestal Base
(B) Buttonhead Screws
For use with
the following
exhibit bases:
Step 2 – Assembly
If you received your exhibit panels from Pannier, most
of the assembly has already been completed for you.
All you need to do is attach the exhibit pedestal leg(s) to the
completed panel assembly with the supplied buttonhead screws as
shown in Figure 3. Proceed to Step 3 – Installation.
(C) Panel Assembly
Single Post Frameless Double Post Frameless
(C) Panel Assembly
(A) Pedestal Bases
Double Pedestal
Figure 1
Button Head
Screw
Figure 2
Figure 3
(B) Buttonhead Screws