Advertisement
Quick Links
How to Plug the electronic interface of the retrofit kit (TalySurf 6,
TalySurf 10, TalyStep, Surtronic 3, Surtronic 3P)
1 - List of components
Interface Box
The electronic interface for the Retrofit Kit is supplied with the following components :
q
3 cables for power supply
q
1 plug
q
1 electronic box
The power supply of the interface box comes from the 5 V DC of the keyboard.
Depending on your keyboard or your PC, the 3 following possibilities are available to plug the interface box to
the keyboard.
Power supply cables
Computer Keyboard
Plug
Page 1
Advertisement
Summary of Contents for Taylor Hobson TalySurf 6
- Page 1 How to Plug the electronic interface of the retrofit kit (TalySurf 6, TalySurf 10, TalyStep, Surtronic 3, Surtronic 3P) 1 - List of components Power supply cables Plug Interface Box Computer Keyboard The electronic interface for the Retrofit Kit is supplied with the following components :...
- Page 2 Computer New keyboard format with New keyboard format Old keyboard format extension piece To plug the electronic interface, follow the steps below : Switch off your computer Unplug the keyboard Plug the electronic interface according to the drawing above Plug your instrument to the electronic interface (use the same cable as for the TalyProfile Dos version) Re start your computer Install the software and select the instrument connected (Menu Bank then Measurement, item Select an instrument)