Advertisement
Quick Links
Manufactured by:
394 Dairy Pak Rd. • Athens, GA 30607
kdframes.com • alan@kdframes.com
P A R T S
L I S T
BACK RAIL
K-1
K-2
SEAT RAIL
K-3
LOUNGER RAIL
PROP
K-4
K-25
PROP CONNECTOR
K-6
BACK LEG (Left and Right)
SEAT LEG
K-7
LOUNGER LEG
K-8
K-29 LEG CONNECTOR
K-15 20" SLAT CAPS
PARTS
(2) K-4 PROP - 15"
(4) K-15 SLAT CAP - 20"
(2) K-16 LOUNGER SLAT CAP - 11"
(2) K-7 SEAT LEG - 9"
(2) K-8 LOUNGER LEG - 9"
K-6L BACK LEG (Left) (1)
K-6R BACK LEG (Right) (1)
Instructions for:
KD Lounger Full
sku# 7832-KD-F
K-16 11" LOUNGER SLAT CAPS
2
K-24 MIDDLE SLATS
2
K-21 BACK SLATS
2
K-22
SEAT SLATS
2
K-23
LOUNGER SLATS
1
H-8
2-1/4" CLEVIS PIN
2
H-12 3-1/4" CLEVIS PIN
2
H-5
HAIR PIN
2
1
H-11 WOOD DOWEL
4
H-19 1 - 3/4" WOOD SCREW
(2) K-21 BACK SLAT - 52"
(2) K-22 SEAT SLAT - 52"
(2) K-23 LOUNGER SLAT - 52"
(7) K-24 MIDDLE SLAT - 48"
(1) K-25 PROP CONNECTOR - 44"
(1) K-29 LEG CONNECTOR - 38"
(2) K-2L SEAT RAIL - 37"
(2) K-1 BACK RAIL - 29"
(2) K-3 LOUNGER RAIL - 24"
v. 111
1
2
7
2
K-8 LOUNGER LEG (2)
2
2
4
4
8
32
20
2
Push Wood Dowels (H-11)
all the way into holes as
shown.
K-4 PROP (2)
K-3 LOUNGER RAIL (2)
K-1 BACK RAIL (2)
K-2L SEAT RAIL (2)
Press the Prop Connector (K-25) onto
the Wood Dowels on the Props (K-4)
and attach with Wood Screws (H-19).
H-19
K-25
K-4
Advertisement
Related Manuals for kd frames KD Lounger Full
Summary of Contents for kd frames KD Lounger Full
- Page 1 Instructions for: Manufactured by: v. 111 Push Wood Dowels (H-11) KD Lounger Full all the way into holes as shown. 394 Dairy Pak Rd. • Athens, GA 30607 sku# 7832-KD-F kdframes.com • alan@kdframes.com P A R T S L I S T K-16 11”...
- Page 2 Attach the Left and Right Back Legs (K-6) to the outside of the BackRails using Be sure that the the 3-1/4” Cevis Pins (H-12). Prop Connector Do not put on the Hair Pins at this time. goes below the Back Rails.
- Page 3 Attach the Seat Legs (K-7) and the Lounger Rails (K-3) to the Seat Rails K-15 using 3-1/4” Clevis Pins (H-12). Secure the Clevis Pins with and Hair Using (3) Middle Slats (K-24) Pins (H-5). push the Wood Dowels into the edge holes on (2) Slat Caps (K-15).
- Page 4 Operation: Push the Slat Decks down onto the Wood Dowels and attach H-19 with Wood Screws (H-19). Bed position: Note: The base may need to be shifted to get the dowels to align with the holes. Lounger position with Back Lift up Back and footrest flat: Slat Deck...