Page 1
INSTRUCTION MANUAL Hot plate,Magnetic Stirrer,Hot Plate & Magnetic Stirrer MODEL :MS100(HP100),MS200,MS300HS ver 1.0 ® MISUNG SCIENTIFIC CO.,LTD #691-4, Duckye-Dong,Yangju-Si,Kyounggi- HEAD OFFICE & Do,482-852 Republic of Korea FACTORY TEL : ++82-31-866-3808 FAX : ++82-31-866-3810 #89,Kwansu-dong, Chongro-ku,seoul,110- 420 Republic of korea SEOUL...
We appreciate you for purchasing MISUNG SCIENTIFIC CO.,Ltd product. Before using the product you have purchased,check to make sure that it is exactly what you ordered. Then,please use it following the instructions below. 1. Safety information 2. Safety information (Setting up) 3.
Page 3
1. Safety information Before you use,read safety precautions carefully,and use this product properly. The precautions described in this manual contain important contents related with safety; therefore,please follow the instructions accordingly. The precautions are composed of DANGER,WARNING and CAUTION. Indicates a potentially or imminently hazardous situation which,if not avoided,could DANGER result in death or serious injury.
Page 4
4. Explanation of each part Front side Rear side Model STIRRER HOT PLATE & STIRRER HOT PLATE & STIRRER MS200 MS300HS MS100(HP100) Heater volume Heater lamp Motor lamp Heater lamp Motor volume Heater volume Main power swich Single fuse holder ※...
Page 5
5. Safety Precaution (in use) Danger Warning Note Unsuitable use causes danger ! 1)Use a properly grounded electrical outlet of correct voltage and current handling capacity. This unit operates only by AC200-230V 50/60㎐ without danger. Check supplied voltage and current of AC200-230V, 50/60HZ before use.
- Check power supply and power cord. - Check power switch "ON". - Check fuse. In case of a malfunction as described above, contact your authorized Misung Dealer. 9. SPECIFICATIONS MODEL MS100(HP100) MS300HS MS200 Type HOT PLATE HOT PLATE & STIRRER MAGNETIC STIRRER Up to 380℃...