Table of Contents
Advertisement
2) Press [+/–] to select "Quality" and press [
enter the submenu. Press [+/–] to select the
recording quality you want: low, normal and
high. Press [
the recording setup submenu.
(5)
Direct recording setting
Connect one connector of the supplied LINE IN
cable into the LINE IN jack on the unit, and the
other connector to a LINE OUT jack of an audio
equipment. This will ensure the recording will not
be interfered by external noises. Press [+/–] to select
"Recording" and press [
submenu. When finishing setting, press "Start
Recording" and press [
recorded files will be automatically saved to the
corresponding directory.
Note:
be sure to select "LINE IN" as the recording
source.
] to finish setting and go back to
Fig. 14
] to enter the recording
] to start recording. The
Fig. 15
29
] to
Advertisement
Table of Contents
