Advertisement
Quick Links
INSTALLATION, OPERATION
& MAINTENANCE MANUAL
Watts
UV Systems
®
Models WUV2 (6, 8 & 12)
WARNING:
Please read carefully before proceeding with installation. Failure to follow attached instructions or
operating parameters may lead to the product's failure. Please save this manual for future reference.
© Watts 2010
M-WQP-WUVSYS-1049
Advertisement
Summary of Contents for Watts WUV2 Series
- Page 1 ® Models WUV2 (6, 8 & 12) WARNING: Please read carefully before proceeding with installation. Failure to follow attached instructions or operating parameters may lead to the product’s failure. Please save this manual for future reference. © Watts 2010 M-WQP-WUVSYS-1049...
- Page 2 SPEcIFIcATIONS NOTE: Line cord and lamp lead wire omitted for clarity. Flow Rate Model Pipe Size Dimensions (L x W x H) Electrical (gpm) WUV2-110 1/2" MNPT 18 x 6 x 5 3/8" 110-130V / 50-60Hz WUV2-230 1/2" MNPT 18 x 6 x 5 3/8 200-250V / 50-60Hz WUV6-110 3/4"...
- Page 3 REPLAcING UV LAMP AND SERVIcING UV SYSTEM NOTE: Avoid touching the sides of the quartz sleeve and lamp, handle by the ends only. Step 1 Disconnect power. Step 2 Turn water off and open valve down stream of system to relieve pressure. Step 3 Remove vinyl cap and unscrew the nut.