Challenger ESL30PC Installation Instructions

Outdoor Series
ESL30PC, ESL60PC, ESL90PC, ESL120PC, ESL150PC, ESL220PC, ESL300PC for 100-240V ac;
SAFETY INSTRUCTION
●
Read instructions carefully before attempting to install fixture.
Retain instruction for future reference.
●
Disconnect power before installing or servicing.
●
Installation must be performed by a skilled/competent person
who is familiar with the appropriate standards and technical
requirements of the appliance and its proper installation.
●
This fixture is for outdoor use and should not be used in
areas with limited ventilation or high ambient temperatures.
INSTALLATION – on 1"~1.66" diameter pole
（ESL30PC, ESL60PC, ESL90PC,）
1. Loosen the screws and open the cover.
2. Remove the 2.76" bracket and screw on 1.66" bracket
instead of. Do not screw it tight.
3. Connect wires into wiring terminal; blue wire to "Neutral"
terminal, brown wire to "Live" terminal, green wire to
"Ground" terminal.
4. Please mention the main specification as following before
wiring. (See Table 1)
5. Slip the fixture on the pole, adjust the fixture to a proper angle, and fix them by screws. Note: interval 3 degree between each step in the fixture.
6. Close the cover and secure it by screws.
INSTALLATION – on 2 in~2.76 in diameter pole（ESL30PC, ESL60PC, ESL90PC,）
1. Loosen the screws and open the cover.
2. Loosen the bracket to get a big enough opening.
3. Connect wires into wiring terminal; blue wire to "Neutral" terminal, brown wire to "Live" terminal, green wire to "Ground" terminal.
4. Please mention the main specification as following before wiring. (See Table 1)
5. Slip the fixture on the pole, adjust the fixture to a proper angle; and fix them by screws. Note: interval 3 degree between each step in the fixture.
6. Close the cover and secure it by screws.
INSTALLATION - on 2"~2.76" diameter pole（ESL120PC, ESL150PC, ESL220PC, ESL300PC）
INSTALLATION INSTRUCTION
N (Blue)
Challenger_ESL30/60/90/120/150/220/300_Instructions_Rev01
L (Brown)