Owens OC7438EX Quick Manual

Hardware included shown on right.
There are extra components in the
bolt pack
Tools required:

1/2" socket

7/16" socket

1/2" wrench

3/8" nut driver

Drill
1)
Locate the front bed cross member and install clip
nut as shown in Fig. 1. If no hole is present you
will have to drill a 1/2" hole and insert 8mm pull
nut as shown in Fig. 4
3)
Cut trim lock to 9-3/4" and attach to FL180D & P as
shown in Fig 3.
Alum Box Boards
IN423
DRILLING INTO VEHICLE IS REQUIRED!
Trim Lock
2)
Attach trim lock
here
2007–C Chevy/GMC FS PU
OC7438EX, OC7438EXB
OC8438EX, OC8438EXB
FL181 FL180D/P
Install self tapping
screws here
Attach the FL181 bracket to the front bed cross
member support, using 5/16" bolt, as shown in
Fig. 2. Next install self tapping screws into the
other holes in the bracket to the cross member.
4)
In front of rear wheel, above front leaf spring
shackle, on the bed cross member, attach clip nut and
8mm pull nut, as shown in Fig. 4.
Bolt pack
3124F