Equipment Connection Warnings • Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.
You will overload your UPS if you connect household appliances, laser printers or surge suppressors. Cords and receptacle adapters are available from Tripp Lite to accommodate most outlet configurations. If rewiring is necessary, refer to the Wire Color-Code Chart in the Specifications section.
Page 4
DB9 Port Connection –Optional–* Using the grey or tan Tripp Lite cable that came with your UPS, connect your primary server’s DB9 port to the single DB9 port labeled “LAN 4.1” (which provides complete intelligent RS-232 communications).** Serial port connections are optional. Your UPS will function properly without these connections.
If this occurs, let the UPS charge for 12 hours and perform a second self-test. If the light continues to stay on, contact Tripp Lite for service. CAUTION: Do not unplug your UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into your network connections.
Page 6
Tripp Lite UPS software. Select models, however, feature a unique “Remote Reboot Outlet” (identified on the back panel of your UPS) which allows you to use Tripp Lite UPS software to remotely reboot equipment connected to this outlet without interrupting power to equipment connected to the other outlets.
European Brown Wire Reference Wire 1 American Line 1 European Line 1 The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change. Smart INT 2200 Smart INT 3000 2200/1700 3000/2400 27+/11+* 2-4 hrs. UL, CE...