Precision 371929 Installation Instructions

*********************************************************************************
#371922 PARTS BAG CONTENTS
(12) Clip, "C", 1.5''
(12) Locknut, #8-32
(12) Thumb Screw, #8-32 Part #016009
Stainless Steel Parts
(1) Top Screen,
(1) Middle PS Screen, Part #371920
(1) Middle DS Screen Part #371921
(1) Bottom Screen
GRILL INSERT
SCREW
#8 X 1-3/4"
TYPICAL SIDE CROSS SECTION
*********************************************************************************
- Before you install your Precision Grill Insert, see the diagrams and parts list for necessary parts.
- Your Grill Insert has been cleaned and the edge trimming applied. It is ready to install as Diagram indicates.
-
Thread the thumbscrews onto the clip, just far enough to allow the locknut to fit fully onto the thumbscrew. Back
the clip up against the locknut. This will allow you to manipulate the clip easier. Position your grill insert using
the thumbscrew/clip assembly through the truck grill bar.
- Pull the screw assembly out until clip engages the truck grill bar. See Diagram #2. Maintain a slight pull on the
thumbscrew and turn clockwise. Finger tighten until snug.
- Precision Grill Inserts are designed to fit your truck. If they do not fit perfectly, they are installed incorrectly
*********************************************************************************
PRECISION GRILL INSERTS
INSTALLATION INSTRUCTIONS
Ford F150, King Ranch/Lariat, Grill Insert (2015)
Combo Kit, Summer #374069
Consisting of Part # 371930 (Grill Insert) & #371929 (Bumper Insert)
Part #370820
Part #016002
Part #371919
Part #371927
LOCK NUT
"C" CLIP
Diagram #2
(Note: the slotting pattern on the actual products may vary from installation diagrams.)
Ford Winter Grill Insert available from your dealer – Part No. 371931
PRECISION DESIGN & MANUFACTURING INC.
THUMB SCREW
#8-32UNC
LEFT SCREEN
BOTTOM SCREEN
Grill Insert, Kit # 371930
LOCK NUT
#8-32UNC
Diagram #1
"C" CLIP
TOP SCREEN
RIGHT SCREEN
.