Download Print this page

OLS PPA Int'l OLSMSRGB User Manual

Motor series mult-color lighting kit

Advertisement

Quick Links

Remote Control (Remote is infrared, meaning line-of-sight)
Push the ON button to turn the unit on and the OFF button to turn the unit off
To operate:
Turn the unit ON
o
Press 1 of any of the 16 colored buttons to change color
o
Dim or Brighten using :
o
Bright
Press one of these buttons to use the pre-programmed mode for your lighting display
o
o
Single color FADE – Press desired color first, then press FADE
One Year Limited Warranty:
PPA International, Incorporated warrants this product to be free of defects in materials or workmanship for one year.
Warranty does not include damage resulting from accidents, mususe, or cutting of LED strip. If this product should become
defective, manufacturer will replace if free of charge provided it is sent with proof of purchase (copy of original receipt),
prepaid freight to PPA International, Incorporated. Warranty is in lieu of all other warranties expressed or implied,
including the warranties of merchantability of fitness for a particular purpose, whether arising by law, custom of conduct.
The rights and remedies provided under warranty are exclusive and in lieu of any other rights or remedies. In no event shall
PPA International, Incorporated be liable for consequential damages.
*Warning: Choking Hazard—small parts. Not intended for use by childern under 3 years of age.*
PPA assumes no responsibility for improper installation of the LED lights, including battery
**Disclaimer :
drain, short, property damage, bodily injury, or consequential damage.**
OLSMSRGB Manual Revision 1.0-121031
Dim
4
O L S
Omni Lighting Systems ™
Motor Series Mult-Color Lighting Kit
User's Manual
Model:
OLSMSRGB
Item #: 9796
1

Advertisement

loading

Summary of Contents for OLS PPA Int'l OLSMSRGB

  • Page 1 Remote Control (Remote is infrared, meaning line-of-sight) ™ O L S Omni Lighting Systems ™ Motor Series Mult-Color Lighting Kit • Push the ON button to turn the unit on and the OFF button to turn the unit off • To operate: Turn the unit ON Press 1 of any of the 16 colored buttons to change color...
  • Page 2 • INSTALLATION AND SAFETY INSTRUCTIONS Connect controller to LED strip (as pictured below) • Read all instructions carefully before installation • Do not discard instructions • Professional installation is strongly recommended • Install only as instructed. Careful installation will ensure prolonged life. Repeated installations may shorten the life of this product •...

This manual is also suitable for:

9796