Page 2
THESE ASSEMBLY FITTINGS FOR CAMDEN COLLECTION INSTRUCTIONS APPLY TO THE FOLLOWING MODELS: • Camden • Hoxton • Carnaby • Plimlico LONG BOLTS DOWELS SPANNER NUTS HALF Feed the long headed bolts in from the back of the legs on the headboard HEADED MOON Screw in the bolt through the internal threaded insert nut.
Page 3
Slot in the 8 dowels to the side rails as illustrated. (Tap in with a rubber mallet if required). Screw in the bolts as illustrated to the bed footer.
Page 4
Locate the side rails on the bolts and secure using Slot in the centre rail. the washers and nuts, tighten using the spanner. * Please note single bed bases (75cm & 90cm) will not include a centre rail.
Page 5
* Please note - if you have ordered a standard single (90cm) or super-king (180cm) bed base you will also receive a set of double slats with sliders. These slats are for holes 4-9 from the head of the bed base. * Some designs (where the mattress doesn’t sit within the frame, but sits on top of it) will come with a Place the end caps on the sprung slats and attach to frame sheet of non-slip matting to prevent the mattress from moving on the base.
Page 6
THANK YOU FOR BUYING A BED FROM N A T U R A L B E D C O M P A N Y DEVONSHIRE POINT, 123-125 FITZWILLIAM STREET, SHEFFIELD, S1 4JP T:01 14 272 1984 E: SALES@NATURALBEDCOMPANY.CO.UK W: WWW.NATURALBEDCOMPANY.CO.UK...