Page 1
QUICK SETUP GUIDE DIY Alarm System Version 1 May 21, 2020...
Page 2
Need help installing your kit? If at any point during your installation you need some help, just give our Technical Support team a call during regular business hours, at 1-833-427-3233. How to complete the activation The last step in activating your kit is for you to call our Technical Support team at 1-833-427-3233.
4. Attach the desktop stand. The angled Control panel deskmount stand snaps onto the rear of the The control panel must be located near an AC outlet. panel. It can be fitted as a high or low- mounted stand and comes with 4 corner It can be placed at a different location within your grips to protect furniture and prevent sliding.
Page 4
Mounting the Thin Door/Window Contact Thin Door/Window Contact Use the figure below as a guideline when mounting The Thin Door/Window Contact (2GIG‐DW10‐345) is the door contact. designed for use on doors, windows, and other objects that open and close. When the magnet Figure 2 Thin Door/Window Contact (which is mounted near the sensor) moves away from or closer to the door contact’s sensor, signals...
Configuring the PIR Features Motion Detector Ensure that you have inserted the PIR battery as The Passive Infrared Motion Detector (2GIG‐PIR1‐ described in Inserting and Replacing the Battery. 345) is a wall-mounted unit with wide‐angle motion Then configure the features as follows: protection.