Advertisement
Quick Links
INC.
YOUR SAFETY DEPENDS ON ATTACHING THIS CHAIR
ACCORDING TO THESE INCLUDED INSTRUCTIONS AND USING
IT ACCORDING TO ITS DESIGNATED USE.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY TO
SAVE THIS MANUAL FOR FUTURE REFERENCE.
DESIGNATED USE:
FAILURE LOAD= 410 LB SEATED PERSON (feet resting on floor).
MAX. RECOMMENDED USAGE LOAD= 250 LB SEATED PERSON (feet resting on floor).
DO NOT STAND, DROP OR JUMP ON CHAIR AT ANY WEIGHT!
INC.
SURFACE MOUNT CHAIRS
INSTALLATION GUIDE & PARTS LIST
FOR METAL STUD WALLS (3
YOU OR DAMAGE TO YOUR WALL.
WALLCHAIR INC.
20 Ausable Beach Road
Peru, New York 12972
phone: (518) 834-9923
email: wallchair@charter.net
website: www.wallchair.com
5
8
!
WARNING!
pg. 1
" depth minimum)
Advertisement
Summary of Contents for WALLCHAIR ORIGINAL WALLCHAIR WITH AUTOMATIC SPRING RETURN
- Page 1 FAILURE LOAD= 410 LB SEATED PERSON (feet resting on floor). MAX. RECOMMENDED USAGE LOAD= 250 LB SEATED PERSON (feet resting on floor). DO NOT STAND, DROP OR JUMP ON CHAIR AT ANY WEIGHT! WALLCHAIR INC. 20 Ausable Beach Road Peru, New York 12972 phone: (518) 834-9923 email: wallchair@charter.net...
- Page 2 INSTALLATION INSTRUCTIONS: FOR METAL STUDDED WALLS (Contact us for help with other types of walls.) 1. LOCATE STUD. BEWARE OF ANY PRE-EXISTING HOUSE WIRING -RISK OF FIRE AND SHOCK! BEWARE: DO NOT LOCATE CHAIR WHERE IT WILL PREVENT THE OPENING OF A NEARBY DOOR WHEN THE CHAIR IS DOWN! Locate a single, uncompromised, metal stud to which you will attach the chair.
- Page 3 3. MARK HOLE LOCATIONS . FIG.3 Place bracket on the center of the stud. Use it as a template to transfer the six hole locations onto the wall. 4. DRILL HOLE LOCATIONS . Remove Bracket. Starting with a small drill bit, incrementally open up each hole location to a final Ø1/2 through the drywall and the closest wall of the metal stud.
- Page 4 7. ATTACH PANEL . FIG.7 Attach PANEL (ITEM#2) to wall stud with ITEMS#7 and to BRACKET ITEM#11 with ITEM#8. Top of slot in PANEL rests evenly on top of FRAME. FIG.7 pg.4...
- Page 5 8. TILT IN ASSY A . FIG.8 Tilt roller pins on ASSY A (ITEM#3) into FRAME (ITEM#1) and let them drop to the bottom of the slot. FIG.8 9. ATTACH ASSY A TO PANEL . FIG.9 FIG.9 Line up holes at bottom of ASSY A and PANEL. Attach ASSY A (ITEM#3) to BRACKET using 2x ITEMS#8 and tghten very securely.
- Page 6 INSTRUCTIONS AND USING IT ACCORDING TO ITS DESIGNATED USE. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY TO YOU OR DAMAGE TO YOUR WALL. WALLCHAIR INC. 20 Ausable Beach Road *Please contact us if you have any questions about installation...