Do you have a question about the EX P-48 Series and is the answer not in the manual?
Questions and answers
Summary of Contents for Exiom Solution EX P-48 Series
Page 1
FOTOVOLTAICA FABRICACIÓN ESTRUCTURAS PHOTOVOLTAIC MANUFACTURING STRUCTURES BIENVENIDO A WELCOME TO INSTALLATION GUIDE...
Page 2
guide Installation Carefully read through these installation instructions before installing, operating or servicing PV system. Failure to follow these instructions may result in bodily injury or damage to property. Keep these instructions! Working on a PV system (installation, setup, maintenance, repairs) must be carried out by qualified and authorized persons.
Page 3
Earthing 4.- Aluminum clamping plate Although the modules are certified to safety class II, we still 5.- EPDM washer 2mm recommend earthing them. The earth connection must be made We recommend using a torque wrench for installation. In example by a qualified electrician. B, the tightening torque (using stainless steel M8 bolts) should be around 15-20Nm.Use the existing holes for securing the module Option 1:...
Page 4
Standard modules For a clear understanding of our modules, please refer to the • The mounting method has been qualified by Exiom Solution illustration of a standard module shown below: Inc. and certified by VDE. Modules should be bolted to sup-...
Page 5
Bolting on long frame side using four innermost mounting holes Mounting rails run perpendicularly to the long frame side Maximum Load: Uplift load ≤ 2400 Pa Downforce load ≤ 5400 Pa Compatible module type: EX-xxxP-48, EX-xxxP-54, EX-xxxP-60, EX-xxxP-72, EX-xxxM-72, EX-xxxM-96, EX-xxxM6-60, EX-xxxM6-72 ____________________________________________________ Bolting on short frame side using four standard mounting holes.
This manual is also suitable for:
Ex p-54 seriesEx p-60 seriesEx p-72 seriesEx m-72 seriesM-96 seriesEx m6-60 series...
Show all
Need help?
Do you have a question about the EX P-48 Series and is the answer not in the manual?
Questions and answers