Download Print this page

Saxby 78654 Instruction Leaflet

Track 1m/2m/3m

Advertisement

Quick Links

Connection
The track accessories are provided with earth connection
points on both sides.
When offering the accessory to the track, verify which
tab needs to be removed. (See left hand diagram).
To remove the tab, grasp firmly with a pair of pliers
and lever back. The tab should snap cleanly off.
(See right hand diagram).
Locate the accessory in the track and push home.
Locate the product in the track with the connections
in the slot.
Our recommendation would be to remove a secition
of material from the end of the track that is opposite
to that of the live feed. This would ensure a perfect
connection and trouble free operation. Always ensure
that the locking screw is tightened.
Max total length of track/ load
Component for
Item
Model
track system
1
78654 / 78655 / 78656
1 meter 3 wire track
2
78657 / 78658 / 78659
2 meter 3 wire track
3
78660 / 78661 / 78662
3 meter 3 wire track
Wiring
• Undo the screw and remove the cover from the live end. Push out the desired cable access point.
• Indentify the correct cable from the supply and pull through.
• Connect the supply wires to the terminal block, opposite the corresponding wires from the fitting.
The central connector can also be wired in this way.
• Refit the cover onto the live end taking care not to trap the cable.
N
L
Care and Safety
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could
damage the finish.
For your safety, always switch off the supply before cleaning.
WWW.saxbylighting.com
End view of track
Remaining Earth tab needs
Earth
to be inserted into Earth
Conductor
conductor to ensure Earth
continuity.
Remove One
or Other Tab
Marked in Grey
Max total
Max total
Rating input
load weight
length of track
220-240VAC,16A
Max. 15kg
50M
220-240VAC,16A
Max. 20kg
220-240VAC,16A
Max. 30kg
Supply
Check that.....
You have correctly identified the wires.
N
The connections are tight.
No loose strands have been left out of
L
the connection block.
Iss .5 18/03/2019
Saxby lighting. BH23 3PE
Instruction leaflet
Track 1m/2m/3m
78654, 78655, 78656, 78657, 78658, 78659, 78660, 78661,78662

Advertisement

loading

Summary of Contents for Saxby 78654

  • Page 1 Earth (See right hand diagram). to be inserted into Earth Conductor conductor to ensure Earth 78654, 78655, 78656, 78657, 78658, 78659, 78660, 78661,78662 • Locate the accessory in the track and push home. continuity. • Locate the product in the track with the connections in the slot.
  • Page 2 Any broken or damaged parts should be replaced supply without your knowledge. as soon as possible. 78660 78661 Saxby will not accept responsibility for any claims This light fitting should be connected to a fused 78662 circuit. arising from a sub-standard installation.

This manual is also suitable for:

786557865678657786587865978660 ... Show all