Page 1
Sage and Sage Elite Takedown Recurve Bows Manual Congratulations on the purchase of your Galaxy bow. We are excited and thankful to have you as a valued customer. This manual covers the Galaxy Sage and Sage Elite Takedown Recurve Bows.
Page 2
ASSEMBLING THE BOW Your Sage or Sage Elite comes in three pieces – riser and two limbs – plus a bow- string. Each limb will be marked with either “Upper” or “Lower” on the square end of the limb. These markings determine which limb goes on the top of the riser, and which goes on the bottom.
Page 3
STRINGING A BOW Always use a bow-stringing device to string and unstring your bow. The bowstring included with your Sage or Sage Elite bow has one loop end larger than the other. Figure 3 (See Figure 3) Place the larger loop over the top limb and slide it down toward the riser.
Page 4
CARING FOR YOUR BOW Your Galaxy bow is very low maintenance. Risers, limbs and bows all are water resistant. Simply wipe them dry with a towel should they get wet, to prevent water damage. Rub the string regularly with an approved bowstring wax to keep it from drying out.