De STIJL INNOCENT Series Installation Instructions

INNOCENT Series sleep systems: Thema / Nova / Linea – installation instructions
Includes 8 packs, containing:
Pack 1: 1 x Headboard parts
Pack 2: 1 x Frame parts
Pack 3-4: 1 x Adjustable base, 1 x Mattress stopper
Pack 3-4: 1 x Adjustable base, 1 x Mattress stopper
Pack 5-6: 1 x Motor
Pack 5-6: 1 x Motor
Pack 7-8: 1 x Mattress
Pack 7-8: 1 x Mattress
1) Assemble the frame as per the frame installation instructions overleaf!
2) Take the adjustable slatted bases out of their packing.
VERY IMPORTANT!!!! – CUT THE TIES AT TOP AND BOTTOM OF BASES.
The tricolour sticker indicates the head side.
Put bases on the floor, slats down, shafts and motor hooks up.
3) Take the motors out of their box. Connect the 9V backup batteries (included).
Remove the plastic covers off the shaft holes on the motors as the arrows point,
use your hand only, no tools are needed.
Place the motors on the shafts of the bases above the hooks.
The hooks should be completely covered by the motors!
Mind that the head & feet labels of the motor are in the right directions:
Head-up label – side of the tricolour sticker (head)
Feet-up label – side with no tricolour sticker (feet)
After placing the motors, return their plastic covers back in place with your hand and ensure that the motors
sit firmly without moving.
4) Place bases inside the bed, as close as possible to the feet side of the frame.
Mind that the head part (with the tricolour sticker) is at the head end.
5) Plug in, and check the movement of the motorised bases while inside the bed frame all the way up and
back to flat.
6) Attach mattress stoppers (came in same packing as the bases) to the feet end of the adjustable base (to the
moving part).
7) Place the mattresses.
Please consult Ari from De STIJL on any question or doubt: 0417 675 666