Page 1
CHRYSLER JEEP 2016 2014 – 2015 Grand Cherokee DODGE 2014 – 2015 Durango 2014 – 2016 1500 2014 – 2016 2500 2014 – 2016 3500 NOTES: 1) Not compatible with iOS devices with iOS12 and up. 2) Not compatible with diesel powered RAM trucks. - Provides a composite A/V input to the factory radio.
Page 2
1. Remove the factory radio from the dashboard and unplug the connectors behind the radio. 2. Mate the T-Harness connections to the factory connectors. (Make sure all connectors are properly seated into the interface and into the radio.) 3. On the CAN Module, set DIP switch #4 to ON to enable the AV Input. 4.
Page 3
SWITCHING TO THE A/V INPUT Press the BACK button once to switch to the AV source. On some vehicles, there is a SWC control switch behind the left side if the steering wheel. Press the middle button to switch to the A/V source. NOTE: If there is no video signal flowing through the AV input, there will be a BLUE screen present.