Product Description
The Lumen Brilliance Wall Pack series lights are the latest
innovation from Horner Lighting providing high output,
while saving energy. The unique Lumen Brilliance light engine
provides an LED light source without the typical driver
electronics. Circuitry added directly to the LED array has
significantly fewer components than traditional power
supplies and lack capacitors that are often the failure point
with traditional drivers.
Precautions
WARNINGS
Risk of electrical shock. Disconnect power before servicing or
installing product.
Risque de choc électrique. Coupez l'alimentation avant
l'entretien ou l'installation du produit.
Risk of injury or damage. Unit will fall if not installed properly.
Follow installation instructions.
Risque de blessures ou de dommages. Unité va tomber s'il n'est
pas installé correctement. Suivez les instructions d'installation.
Risk of injury. Wear safety glasses and gloves during installation
and servicing.
Risque de blessure. Porter des lunettes de sécurité et des gants
lors de l'installation et de l'entretien.
Risk of injury or damage. LED light sources achieve full intensity
immediately after powered. Do not look directly at the lights.
Risque de blessures ou de dommages. Sources de lumière LED
parvenir à pleine intensité immédiatement après sous tension. Ne
regardez pas directement la lumière.
Unit Installation
Unpack the unit and check for any shipping damage.
59 South State Ave., Indianapolis, IN 46201 | (p) 317.916.4274 (tf) 877.665.5666 (f) 317.639.4279 | www.hornerlighting.com
Risk
o f
d amage.
T he
L umen
B rilliance
technology
m ust
m atch
t he
i nput
v oltage
t o
the
s upply
v oltage.
P lease
c onfirm
t he
product
v oltage
a nd
s upply
v oltage
m atch
before
i nstallation.
The LBWP series uses a mounting bracket to secure the
fixture. There are two 3mm Allen set screws holding it
in place. Remove these to start the mounting process.
LBWP SERIES
INSTALLATION GUIDE
LMAN0042-02-EN