Xalusa LENO Series Mounting Instructions

LENO mounting instructions
E SINGLE | T SINGLE
3 3/8"
Armstrong
®
Silhouette
®
XL 9/16 bolt
slot grid
A SYSTEM start/end type
Armstrong
®
Suprafine
®
XL 9/16 flat
T-grid
B SYSTEM run/mid type
Install Armstrong grid ceiling according to
®
Armstrong's instructions. Silhouette
Suprafine ceiling systems pictured below.
®
LENO E
Updated: 12/29/14
23 3/8" | 47 3/8" | 95 3/8"
47 11/16"
24" | 48" | 72" | 96"
and
®
LENO T
WARNING:
For your safety read and understand these instructions
completely before starting installation. Disconnect power
supply before installing, servicing or checking. Retain these
instructions for ordinary and special maintenance and
servicing purposes.
Please do not touch the LEDs!
Wear ESD protective clothing
IMPORTANT:
This XAL fixture is intended for installation in accordance with
the National Electrical Code and local regulations. To assure
full compliance with local codes and regulations, check with
your local electrical inspector before installation. These codes
should be carefully studied before starting work.
Mounting hardware supplied by others.
LENO A
XALUSA.COM
US-468243000000
LENO B