Philips AJ5000/05 User Manual

Register your product and get support at AJ5000
A
EN User manual
a b c d
EN
1 Important
Safety
• Read these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
• Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the clock radio.
• Only use attachments/accessories specified by the
manufacturer.
• Unplug this clock radio during lightning storms or when unused
for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is
required when the clock radio has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the clock radio, the clock
radio has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• This clock radio shall not be exposed to dripping or splashing.
• Do not place any sources of danger on the clock radio (e.g.
© 2011 Koninklijke Philips Electronics N.V.
liquid filled objects, lighted candles).
All rights reserved.
AJ5000_05/79_UM_V1.0
k l m n o
r q p
e f g h i j
• Where the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
2 Your clock radio
Congratulations on your purchase, and welcome to Philips! To fully
benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
Introduction
With this unit, you can:
• listen to FM radio;
• know the time;
• wake up by buzzer alarm, radio, or melody; and
• enjoy mood light.
B
What's in the box
Check and identify the contents of your package:
A
Overview of the main unit
a HR/TUNING +/-
• Adjust hour.
• Tune to radio stations.
b AL1/AL2
• Turn on/off alarm.
• View alarm settings.
c PROG/SCAN
• Scan/store radio stations.
B D
a
SET TIME
User Manual
c
C
E
a
d COLOR • Select alarm source for Alarm 2.
• Select mood light color. p Power cord & Antenna
e SNOOZE/BRIGHTNESS
q Battery tray
• Snooze alarm.
r VOL
• Adjust display brightness.
• Adjust volume.
f RADIO
• Turn on/off radio.
3 Get started
• Turn off the ringing alarm.
g SLEEP
Always follow the instructions in this chapter in sequence.
• Set sleep timer.
h MIN/PRESET +/-
C
Install battery
• Adjust minute.
• Select a preset radio station.
i Warning
• Turn on/off mood light.
•
Risk of explosion! Keep batteries away from heat, sunshine or fire.
• Adjust brightness level of mood light.
Never discard batteries in fire.
j CLOCK/SET AL1/SET AL2/SET TIME
• Danger of explosion if battery is incorrectly replaced. Replace only
• Set time/alarm. with the same or equivalent type.
• View time. • The battery contains chemical substances, so it should be disposed
of properly.
k 12/24H·DST
• Keep children away from the battery.
• Select 12/24 hour format.
• Select daylight saving time (DST) option.
l TIME ZONE
Note
• Select time zone.
• You can only use AC power as power supply. The lithium CR2032
m WAKE TO LIGHT
battery is only for back-up purpose.
• ON/OFF: activate/deactivate mood light when alarm
• When power is disconnected, the display backlight is off.
sounds.
n AL1/RADIO·BUZZ· 1
When is displayed, replace the battery as indicated.
• Select alarm source for Alarm 1.
o AL2/RADIO·BUZZ· 2
F
(For illustration only)
b
d
G
b
TUNING
VOL
Connect power F
Caution
• Risk of product damage! Ensure that the power voltage corresponds
to the voltage printed on the back or underside of the clock radio.
• Risk of electric shock! When you unplug the AC adapter, always pull
the plug from the socket. Never pull the cord.
Plug and set
The clock radio has "plug and set" feature. When power is connected,
the clock is set automatically.
Select time zone
Check if the time of the clock radio is consistent with the local time. If
not, adjust the time zone settings according to your location.
1
In standby mode, press TIME ZONE.
»
The current time zone number blinks on the display panel.
2
Press TIME ZONE repeatedly to select time zone.
For Australia:
Australian Western Standard Time (AWST) +8
Australian Central Standard Time (ACST) +9.5
Australian Eastern Standard Time (AEST) +10 (default)
New Zealand Standard Time (NZST) +12
H
a b
SET AL 1
SET AL 2
c d
PM
For United Kingdom and Ireland:
Western European Time (WET) +0 (default)
Set clock D
In standby mode, you can set clock manually.
Select DST (daylight saving time) mode
For countries with daylight saving time (DST), the clock radio offers you
DST option to adjust summer time.
In standby mode, press and hold 12/24H·DST for two seconds.
»
The clock advances by one hour.
Tip
• To exit DST mode, repeat the above operation.
• To select 12/24 hour format, press 12/24H·DST repeatedly.
4 Listen to FM radio
Tune to FM radio stations E
Note
•
Position the antenna as far as possible from TV, VCR, or other
radiation source.
• For optimal reception, fully extend and adjust the position of the
antenna.