Valcom IP FlexHorn VIP-580A Quick Start Manual

IP FlexHorn Surface Mount
INTRODUCTION
The VIP-580A and VIP-581A IP FlexHorn
Surface Mount units enable loudspeaker voice
paging anywhere on an Ethernet network. The
VIP-580A/VIP-581A consists of a network-
connected high efficiency horn, allowing stand
alone capability when used with a SIP telephone
system or can be accessed from a variety of
Valcom managed VoIP products. Power is
provided to the VIP-580A or VIP-581A via a
Power over Ethernet (PoE) switch meeting the
802.3af specification.

SPECIFICATIONS

Access Methods

SIP telephone system

PBX, FXO Port w/Valcom Network
Station Port

POTS telephone set w/Valcom Network
Station Port

PBX, FXS Port w/Valcom Network Trunk Port

Valcom M Cast Page Group
Features

Power over Ethernet (PoE) 802.3af
compatible

Angled surface mount (VIP-581A)

Straight surface mount (VIP-580A)

Paintable grille and enclosure
Nominal Power Requirements
Via 802.3af (PoE) Ethernet Switch:
Environment
Interior Installation only
Temperature:
Humidity: 0 to 85% non-precipitating
VIP-580A / VIP-581A
Class 3
0 to +40° C
1
VIP-580A
VIP-581A
Dimensions/Weight
VIP-580A:

10.0" H x 12.2" W x 4.0" D
(25.4cm H x 30.9cm W x 10.2cm D)
Weight: 7.4 lbs. (3.4 kg)
VIP-581A:

9.9" H x 12.2" W x 4.0" D (top) x
2.7" D (bottom)
(25.2cm H x 30.9cm W x 10.2cm D (top) x
6.9cm D (bottom)

Weight: 7.4 lbs. (3.4 kg)
ISSUE 2
947836