Page 1
Quick Start Guide What’s in the Box? You should find these items upon opening the box. Stand Power adaptor FM wire antenna MW antenna 1 dock & 8 Dock User manual Adapters for iPod MCM239D Step A Install Step Prepare Step Enjoy CR2025...
Install Mounting the stand onto the set Locate the bottom of the main unit and find the slot, then slide the stand in the slot until it stops, as indicated in the figure. Rear connections Speaker (right) Connect the cable of the left speaker to LEFT (red and black) and the cable of the right speaker to RIGHT (red and black).
Setup Setup Setting the clock Press and hold STANDBY-ON/ ECO POWER y to switch the set to Standby mode. ➜ The display shows the set time. ➜ -- --:-- -- flashes by default if you have not set the clock. In the standby mode, press and hold DISPLAY/CLOCK on the remote control.
Enjoy Tuning to radio stations Press SOURCE once or more to select TUNER (or TUNER on the remote control). Press and hold PROGRAM until AUTO appears ➜ Available stations are programmed in order of waveband reception strenght: RDS, FM followed by MW. Press the ALBUM/ PRESET buttons once or more until the desired preset station is displayed.
“Installing the dock adaptor”, and the important notes for dock operation. DOCK IN jacks on the main set correspondingly. iPod on the remote) to select DOCK source. 2007 C Koninklijie Philips Electronics N.V. All rights reserved. http://www.philips.com Speaker Portable player (left)