Advertisement
Quick Links
© Panduit Corp. 2016
Finger Bracket Installation
•
Remove Shipping Brackets.
•
Install Finger Brackets.
Note: Front E-Rails should be located a minimum of 126mm (4.96") from the front or rear of the cabinet.
1
Use caution
handling once
the shipping
bracket is
removed
INSTALLATION INSTRUCTIONS
2x Shipping
Bracket
For Technical Support: www.panduit.com/resources/install_maintain.asp
D-Type Finger Bracket Kit
Part Number(s) : D12FBB, D15FBB
2
Page 1 of 2
V00029LA
M5 x 0.8
T25 Torx head
screws
REAR
Tools needed:
•
T25 Torx driver
Advertisement
Summary of Contents for Panduit D Series
- Page 1 D-Type Finger Bracket Kit Part Number(s) : D12FBB, D15FBB INSTALLATION INSTRUCTIONS © Panduit Corp. 2016 V00029LA Finger Bracket Installation • Remove Shipping Brackets. • Install Finger Brackets. Note: Front E-Rails should be located a minimum of 126mm (4.96”) from the front or rear of the cabinet.
- Page 2 INSTALLATION INSTRUCTIONS © Panduit Corp. 2016 V00029LA Placement • Locate Fingers so the distance between fingers is centered in RU spacing. • If applying the Finger Bracket Kit to the rear E-Rails follow the same Installation process on the rear E-Rails.