Z.R. Tools MS25-1 Operation Manual

03/12/2013
www.zrtool.com/html/MS25Manual.htm
Z.R. Tool Inc. (905) 836-0590 - Strapping Machinery, Tools & Parts
SAFETY INSTRUCTIONS
SPECIFICATIONS
OPERATING INSTRUCTIONS
MAINTENANCE
ADJUSTMENTS
REPLACEMENT OF PARTS
MS25 DIAGRAM
MS25 PARTS LIST
SAFETY INSTRUCTIONS
Please read these instructions carefully. Failure to follow these instructions could result in
severe injury.
1. Before using the tool read the entire operation manual thoroughly.
2. Always wear safety glasses and face protection when operating the tool.
3. Always wear protective gloves when handling strapping.
4. Always use only replacement parts from an authorized dealer.
These tools are designed for use with high tensile strapping and all parts are
manufactured or treated for these extreme conditions. Performance of your tool will be
affected if any other parts are used, which may cause injury.
top of page
SPECIFICATIONS
Model Number Strap Width
MS25-1 1/2" (13 mm)
MS25-2 5/8" (16 mm)
MS25-3 3/4" (19 mm)
This tool is not to be used with material above .025" thickness.
Weight: 9.4 lbs
Base Length: 4.5"
Base Width: 2.4"
Height: 4.2"
STRAPPING QUALITIES
Designed for use with regular duty strapping (107,000 PSI / 750 N/mm
strapping (156,000 PSI / 1100 N/mm
top of page
OPERATING INSTRUCTIONS
A
Place strapping tightly around the
package and hold in place with left
hand.
Take tool with right hand and pull the
feedwheel lever towards the sealing
lever.
Insert both portions of the strap with
MS25 OPERATION MANUAL
Strap Thickness
.020" - .025" (0.5 mm - 0.635 mm)
.020" - .025" (0.5 mm - 0.635 mm)
.020" - .025" (0.5 mm - 0.635 mm)
*.015" - .019 (038 mm - 0.48 mm)
requires knife ZR-0070
(4.25 kg)
(115 mm)
(60 mm)
(105 mm)
2
).
2
) to high tensile
1/8