Philips 20PF7835/69S Operating Instructions

P L
AGE AYOUT
FRONT
PAGE
PAGE COVER PAGE 2 PAGE 3 PAGE 4 PAGE 5
LAYOUT
É É É É É
▼
Operating Instructions
▼
PAGE 6 PAGE 7 PAGE 8 PAGE 9 PAGE 10 PAGE 11
É É É É É É
▼
PAGE 12 PAGE 13 PAGE 14 PAGE 15 PAGE 16 PAGE 17
É É É É É É
▼
BACK
PAGE
PAGE 18 PAGE 19 PAGE 20 PAGE 21 PAGE 22 PAGE 23
É É É É É É
▼
PAGE 24 PAGE 25 PAGE 26 PAGE 27 PAGE 28 PAGE 29
É É É É É É
▼
PAGE 30 PAGE 31 PAGE 32
É É É
NOTE : Finished size is 870 mm by 580 mm
6 C A /V S (P )
ONNECTING THE UDIO IDEO OCKETS LAYBACK 7
You can view the playback of DVD discs /VCR tapes (Video Disc player, DVD player, camcorders,
etc.) by using the AUDIO and VIDEO INPUT sockets at the bottom of the TV.
You can view the playback of DVD discs by using
DVD (Equipped the COMPONENT VIDEO INPUT sockets
with "Y", "Pb" and "Pr"
and Output sockets)
at the bottom of the LCD TV.
– Connect the "Y", "Pb" and the "Pr" sockets at
Bottom of TV
the bottom of the LCD TV to the "Y", "Pb" and
"Pr" OUTPUT sockets of the DVD player to
Y Pb Pr view playback of DVD discs.
L AUDIO R
– Connect the AUDIO IN sockets at the bottom
of the TV to the AUDIO OUT sockets on the
DVD player..
AV
– Press the button on the remote control and
select the CVI channel.
For more convenient direct playback connections,
Side Controls
the Side Audio/Video Input sockets allow for quick
and easy connections, particularly Camcorder tape
recordings.
– Connect the S-VIDEO socket (if available) from
the Camcorder to the Side S-VIDEO socket of
Camcorder
the TV. You need not connect the Side VIDEO
IN socket of the TV if the S-VIDEO socket is
connected.
– Connect the AUDIO OUT sockets (Right and
Left) from the Camcorder to the Side AUDIO
IN sockets.
AV
– Press the button on the remote control and
select the AV2 channel.
Bottom of TV
– Connect the VIDEO IN and AUDIO IN
sockets at the bottom of the LCD TV to the
AUDIO and VIDEO OUT sockets on the VCR.
Note : Connect the VCR or the DVD player
directly to the LCD TV. For example, do not
connect the DVD player to a VCR, then connect
the VCR to a TV. This type of connection may
Rear of VCR distort the picture and sound or give you a black
VCR
OUT OUT OUT and white picture.
ANTENNA VIDEO R AUDIO L
AV
– Press the button on the remote control and
IN IN IN
select AV1 channel.
12 A LCD TV I M 13
CCESSING THE NSTALLATION ENU
S
M T LCD TV C ELECTING THE
ANUAL UNING OF HANNELS
This feature allows you to select your desired COLOUR and SOUND system. If AUTO is
Manual tuning allows you to store each programmes manually.
selected, the respective colour and sound system will be automatically selected according to the
transmission system. Note: Select your desired colour and sound system manually if reception is
poor at AUTO mode. If you select colour system manually, sound system should also be selected
k k
MENU MENU k
MENU INSTALL ▲
Ñ manually and vice versa.
LANGUAGE • ENGLISH
Ñ É
• AUTO STORE B.MELAYU
Press Button
• MANUAL STORE
•
SORT
•
CHANNEL EDIT
Repeat step 1 to step 5 as in "MANUAL TUNING OF CHANNELS"
•
▼
1. Enter main menu. 2. Select INSTALL. 3. Enter Install menu.
or
Press Button
Result on Screen
4. Press button repeatedly until
INSTALL
MANUAL STORE is selected.
MANUAL STORE
▲
• COLOUR SYSTEM •
5. Enter MANUAL STORE menu.
• SOUND SYSTEM
SEARCH • É 196.23MHZ
Ñ
• CHANNEL
6. Select SEARCH. •
STORE
▼
INSTALL
7. Start manual tuning. Searching stops MANUAL STORE ▲
• COLOUR SYSTEM •
once a transmitting channel is found.
• SOUND SYSTEM
or
SEARCH • 196.23MHZ
To continue searching, press the Ñ É
• CHANNEL
button again.
• STORE
▼
8. Select CHANNEL.
INSTALL
MANUAL STORE ▲
• COLOUR SYSTEM •
1 2 3 •
SOUND SYSTEM
4 5 6 9. Key in the desired channel number.
•
7 8 9 SEARCH
0
• •
CHANNEL É 18
Ñ
•
STORE
▼
10. Select STORE.
INSTALL
MANUAL STORE
▲
• •
COLOUR SYSTEM
11. Store tuned channel. •
SOUND SYSTEM
•
SEARCH
•
CHANNEL
•
Ñ STORE É STORED
▼ i
i 12. Exit menu from screen.
LCD TV LCD TV LCD TV
Safety Information/Precaution .......................................................................................3
Hooking Up Your TV Use / Care of Remote Control .........................................4
Mounting Procedures for LCD TV .............................................................................. 5
Connecting the Audio/Video Sockets (Playback) ................................................. 6 – 7
Connecting the Headphone .............................................................................................7
Connecting the FM Radio Mains ....................................................................................7
Functions of Remote Control ..........................................................................................8 – 9
Functions of TV Controls ..................................................................................................10
Accessing the TV Main Menu and Sub-Menus..........................................................11
Accessing the TV Installation Menu
Choosing the Menu Language and Automatic Tuning of LCD TV Channels ..............11
Manual Tuning of LCD TV Channels ................................................................................... 12
Selecting the Colour/Sound System........................................................................................13
Fine Tuning of LCD TV Channels ..........................................................................................14
Sorting of LCD TV Channels .................................................................................................15
Editing of LCD TV Channels ..................................................................................................16
Naming of LCD TV Channels ................................................................................................17
Using the LCD TV Picture/Sound Menu ................................................................... 18
Accessing the TV Features Menu
Activating the Timer...................................................................................................................19
Using the Mode Select ..............................................................................................................20
Activating the Child Lock..........................................................................................................20 – 22
Using the Screen Formats ................................................................................................23
Using the Program List Feature.....................................................................................23
Activating the TV Smart Picture/Sound Control................................................. 24
Using the Teletext.................................................................................................................25 – 26
Accessing the FM Radio Installation Menu
Language, Auto Store, Manual Store, Sort, Name ............................................................. 27
Using the FM Radio Sound Menu................................................................................... 28
Using the FM Radio Smart Sound Control................................................................28
Accessing the FM Radio Features Menu
Activating the Timer...................................................................................................................29
Using the Mode Select ..............................................................................................................30
Activating the Screensaver........................................................................................................30
Before Calling Service ........................................................................................................ 31
Specifications............................................................................................................................32
3139 125 31831
8
C A /V S (P )
ONNECTING THE UDIO IDEO OCKETS LAYBACK
The S-Video connection on the Side of the
& POWER button
LCD TV is used for the playback of S-VHS
– Switch set off to standby mode. To switch
VCR tapes, Video discs, DVD discs, Video
on set from standby mode, press Channel
Games or Compact Disc-Interactive (cd-i)
+/– , Digit (0 -9) or Power button.
Side controls
discs, etc. Better picture detail and clarity is
é ALTERNATE CHANNEL button
possible with the S-Video playback as
When in TV mode, it allows to alternate
compared to the picture from a normal
between the current channel and the previous
antenna (RF) connection. channel.
" SLEEPTIMER button
– Connect the S-VIDEO socket on the side
of the LCD TV to the S-VHS OUT socket When in TV/Radio mode, it allows you to select a
time period in which the set will switch to standby
on a S-VHS VCR.
VCR (Equipped mode automatically upon reaching the selected
with Video and – Connect the AUDIO IN sockets at the
Audio sockets)
bottom of the TV to the AUDIO OUT time period. You have a choice of time period
OUT OUT OUT OUT Back of S-VHS VCR
sockets on the VCR. Note : You need not starting from OFF up to a maximum of 240
R AUDIO L VIDEO S-VIDEO ANTENNA
minutes . Press the button repeatedly to cycle
connect the VIDEO IN socket of the LCD
IN IN
IN
through the various time periods and select the
TV if S-VIDEO IN socket is connected.
time period of your choice.
– Press the AV button on the remote control
' 4 4 4 button 4 4
and select SVHS2 channel.
When in TV/Radio mode, it allows you to switch from
Stereo to Mono sound during stereo transmission
C H
ONNECTING TO THE EADPHONE
or to choose between language5or language6
during dual sound transmission.
( FORMAT button
Insert the plug into the headphone socket
When in TV mode, it allows you to select your desired
; on the Side sockets of the LCD TV.
screen format. (Refer to section on "Using the Screen
Format").
§ TELETEXT buttons
In teletext mode, it allows you to access teletext
information. (Refer to section on "Using the Teletext")
è SMART SOUND button
Press the Smart Sound button repeatedly to access 4
different types of sound settings and choose your desired setting.
C FM R M
ONNECTING TO ADIO AINS
! RADIO/TV button
When in TV mode, pressing the button allows you to switch to
To enable you to access FM radio mode Radio mode. Likewise, in Radio mode, it allows you to switch to TV mode.
FM ANTENNA in the TV, you must connect the FM
ç MENU button
Bottom of TV Antenna to the FM Antenna socket.
Displays the main menu. Also exits menu from the screen.
0 CURSOR buttons
– button allows you to select the next item on the menu.
– button allows you to select the sub-menus and adjust the settings.
1 VOLUME + / – button
Increases or decreases volume.
A LCD TV I M 14 A
CCESSING THE NSTALLATION ENU CCESSING THE
C /S S
OLOUR OUND YSTEM F INE T UNING OF
This feature allows you to adjust picture reception in areas of weak reception.
k
MENU
Result on Screen
6. COLOUR SYSTEM is highlighted.
Enter COLOUR SYSTEM mode. 1. Enter main menu.
INSTALL
MANUAL STORE
▲
COLOUR SYSTEM • AUTO
Ñ É
7. Select the desired colour system.
• • SOUND SYSTEM PAL
• SEARCH SECAM
Press Button
• CHANNEL
• STORE
8. Exit from colour system mode. ▼
INSTALL 4. Press button repeatedly until
MANUAL STORE
▲ MANUAL STORE is selected.
•
9. Proceed to select the SOUND COLOUR SYSTEM
•
Ñ SOUND SYSTEM AUTO
SYSTEM. •
SEARCH B/G
5. Enter MANUAL STORE menu.
•
CHANNEL D/K
•
STORE
▼
10. Enter SOUND SYSTEM mode. INSTALL
MANUAL STORE
▲
•
COLOUR SYSTEM 6. Press button repeatedly until
•
11. Select the desired sound system. Ñ SOUND SYSTEM É AUTO
• FINE TUNE is selected.
SEARCH B/G
•
CHANNEL D/K
•
STORE
▼ or 7. Start fine-tuning until desired
12. Exit from sound system mode.
INSTALL
picture and sound is obtained.
MANUAL STORE ▲
• COLOUR SYSTEM •
13. Press button repeatedly until • SOUND SYSTEM
• SEARCH
STORE is selected.
• CHANNEL
STORE • É
Ñ 8. Select Store.
▼
INSTALL
9. Store last fine-tuned status.
MANUAL STORE
14. Store selected system. ▲
• •
COLOUR SYSTEM
•
SOUND SYSTEM
•
SEARCH
•
CHANNEL
•
STORE É STORED
Ñ
10. Exit menu from screen.
i
▼
15. Exit menu from screen.
3 S
• Disconnect mains plug when :
– the red light below the TV screen is flashing continuously.
– cleaning the TV screen, never use abrasive cleaning agents.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
• No naked flame sources, such as lighted candles, should be placed above or near the TV.
• Do not place your TV set under direct sunlight or heat.
• Leave at least 5 cm around each side of the TV set to allow for proper ventilation.
• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or
water.
• No objects (such as vases) filled with liquids should be placed above the TV so as to avoid
dripping or splashing of liquids on the set.
• Make sure you open the stand at the rear of the set when you place your TV set on a
solid base, strong enough to withstand the weight of the set.
• Do not shift or move the set around when it is switched on.
• Do not connect any AC/DC adaptor to your set that does not originally come with the
set. Only use recommended part that are approved by Philips manufacturer.
• Caution : Do not use cover or enclose the AC/DC adaptor with any objects like a cloth
or box which might shorten the life time of the equipment.
• Do not touch, push or rub the surface with hard object.
• When the surface becomes dusty, wipe gently with absorbent cotton or other soft
materials like chamois, soak with petroleum benzene. Do not use acetone, toluene and
acohol as it causes chemical damage to the polarizer.
• Wipe off saliva or water droplets as soon as possible. Long time contact with polarizar
causes deformations and colour fading.
• Be careful of condensation at sudden temperature change. Condensation does damage to
polarizar or electrical contact parts. After condensation fades, smear or spot will occur.
Recycling Directive – To minimise harm to the environment, the batteries
supplied with the TV set do not contain mercury or nickel cadmium. If possible,
when disposing the batteries, use recycling means available to you. Your TV
set uses materials which are reusable or which can be recycled. To minimise
the amount of waste in the environment, specialist companies recover used
sets for dismantling and collection of reusable materials (contact your dealer).
F R C 9 F
UNCTIONS OF EMOTE ONTROL UNCTIONS OF
2 TELETEXT buttons
In teletext mode, it allows you to access
teletext information. (Refer to section on
&
"Using the Teletext")
2
é
A/CH q X
" '
3 PROGRAM LIST
( ( ( ( ( Allows you to navigate through a list of
§ § § § §
installed programs for a quick overview of
b g § § § § §
the channels and activate the channel you
è SMART RADIO/TV SMART
have selected.
!
k
MENU 4 SMART PICTURE button
ç
Press the Smart Picture button repeatedly
0 to access 5 different types of picture settings
and choose your desired setting.
1
MUTE
5 SURROUND SOUND button
¬
V
CH
– Allows you to select Incredible Surround,
and Stereo sound when transmission is in
stereo mode.
1 2 3
– Allows you to select Spatial Sound or Mono
4 5 6 sound when transmission is in mono mode.
6 CURSOR buttons
7 8 9
– button allows you to select the sub-
i 0 menus and adjust the settings.
AV
– button allows you to select the next
item on the menu.
7 CHANNEL + / – buttons
Allows you to select channels in ascending
or descending order.
8 MUTE button
Mutes sound. To restore sound, press
button again.
9 DIGIT (0 -9) buttons
Allows you select a channel. Note : For a
2-digit number, the second digit must be
entered before the "–" sign disappears.
AV button
20
Allows you to select the AV channels.
OSD button
21
– Exit on-screen menu.
– Also displays information like current
channel number, sound mode, etc.
LCD TV I M 15 A
NSTALLATION ENU CCESSING THE
S ORTING OF LCD TV C HANNELS
LCD TV C HANNELS
This menu allows you to change channel number of your choice for a particular station.
k k MENU k MENU
MENU MENU
INSTALL ▲
Ñ •
Ñ LANGUAGE É ENGLISH
•
AUTO STORE B.MELAYU
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
•
▼
2. Select INSTALL. 3. Enter Install menu. 1. Enter main menu. 2. Select INSTALL.
Result on Screen
Press Button
4. Press button repeatedly until
INSTALL
SORT is selected.
MANUAL STORE ▲
• •
Ñ COLOUR SYSTEM É AUTO
•
SOUND SYSTEM PAL
•
SEARCH SECAM
• CHANNEL
• STORE
5. Enter SORT menu.
▼
1 2 3 6. Key in the channel number in the FROM
4 5 6
INSTALL
7 8 9
0
MANUAL STORE
▲
• column, that is the channel you want to
SOUND SYSTEM
•
SEARCH swap from.
•
CHANNEL
•
STORE
Ñ FINE TUNE É
7. Select TO.
▼
1 2 3
4 5 6
8. Key in the channel number in the TO column,
7 8 9
0
INSTALL
that is, the channel you want to swap to.
MANUAL STORE ▲
• COLOUR SYSTEM •
• SOUND SYSTEM
9. Select EXCHANGE.
• SEARCH
• CHANNEL
STORE • É STORED
Ñ 10. Activate exchange of channels.
▼
11. Exit menu from screen.
i
I H U Y TV (B
AFETY NFORMATION 4 OOKING P OUR
Positioning of the TV set
• Make sure you open the stand at the rear of the set
5 cm
5 cm
5 cm when you place your TV set on a solid base, strong
Ñ É
Ñ É enough to withstand the weight of the set.
• Leave a space of at least 5 cm around each side of the
TV set to allow for proper ventilation.
• Do not place TV set near a radiator or other sources
of heat.
• Do not place TV set where it can be exposed to rain
or excessive moisture.
Antenna Connection
• Connect the aerial plug to the antenna socket ¬
on the backcover.
P
RECAUTIONS
Mains Connection
The LCD TV works with a DC supply (the voltage is
indicated on the label). IMPORTANT : Only use the
AC-DC adaptor supplied with the set.
• Connect the DC plug of the adaptor to the LCD TV
DC socket (DC Input is 12V for 15" model and 24V
for 20" model). Leave some space around the adaptor
for ventilation. Note : DC plug and socket diagram is
not representative of the actual plug and socket.
• Insert the adaptor power lead and insert the mains plug
into the wall socket.
Switching on the Set
• Press the main power button on the top controls
to switch on/off the TV.
• If the set is on standby, press the Power button on the
remote control to switch on set.
U /C R
SE ARE OF EMOTE
• Insert the correct size batteries into the
compartment.
• Ensure the batteries are placed in the right
direction.
R C 10 F TV C
EMOTE ONTROL UNCTIONS OF
é
&
2
X
A/CH q
2
3
b g
SMART RADIO/TV SMART
4
5 15PF7835
k
MENU
6
7
MUTE
¬
V
CH
8
1 2 3
9
4 5 6
7 8 9
i 0
21 AV 20
'
&
Mains Power button Switch mains power on or off.
é
Volume – / + buttons Decreases / Increases sound volume.
"
Channel ¸ / ˚ buttons Select channel in descending/ascending order.
'
Remote Sensor Acts as a sensor for activating the controls of the
TV when remote control handset is aimed at it.
Note
• You can enter the main menu by pressing both the Volume- and+buttons at the
same time.
• Press the Channel ˚or¸ button to select the next item on the menu.
• Press Volume + or – button to access sub-menu and adjust the settings.
LCD TV I M 16 A LCD TV I
NSTALLATION ENU CCESSING THE
E DITING OF LCD TV C HANNELS
This feature allows you to edit or skip channels which have bad or weak TV signal or channels
that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by
the CHANNEL + or – button. You can only access the channel by the DIGIT (0 -9) button.
k k
MENU
INSTALL ▲
Ñ
LANGUAGE • ENGLISH k k
Ñ É MENU MENU
MENU
• AUTO STORE B.MELAYU
• MANUAL STORE
•
SORT
•
CHANNEL EDIT
•
▼
3. Enter Install menu.
1. Enter main menu. 2. Select INSTALL. 3. Enter Install menu.
Press Button
Result on Screen
4. Press button repeatedly until
INSTALL CHANNEL EDIT is selected.
• LANGUAGE FROM
• AUTO STORE TO
• MANUAL STORE EXCHANGE
▲
• É SORT
▼
• CHANNEL EDIT
5. Enter channel edit mode.
INSTALL
SORT ▲ or 6. Select the channel you want to skip.
•
Ñ FROM É 8
•
TO
•
EXCHANGE
7. Activate skipped mode.
▼
INSTALL
SORT ▲
• 8. Exit menu from screen.
FROM i
•
Ñ TO É 6
• EXCHANGE
▼ How to restore skipped channels
INSTALL
• Repeat steps 1 to 5 as in "Editing of Channels".
SORT ▲
•
FROM
• Select the channel you want to restore by the (CURSOR UP)
•
TO
•
EXCHANGE É EXCHANGED or (CURSOR DOWN) button.
Ñ
• Press the (CURSOR RIGHT) button to activate restoring of channel.
▼
• Exit menu from screen by the (OSD) button.
i
C ) M P LCD TV
ASIC ONNECTION 5 OUNTING ROCEDURES FOR
If you want to mount the LCD TV on any device, this set has four mounting interfaces fulfilling
VESA specifications.
Rear of LCD TV
Screws Screws
Stand
1) Lay the LCD TV face-down on a flat surface with a cushion or other soft material to
protect the screen.
2) Remove all cables connected on the TV.
3) Remove the two screws and then slide down the stand and remove stand from the LCD TV.
4) Screw in mounting plate. Reconnect all cables to the LCD TV.
You are now ready to mount the device. Below is an example of adjusted ranges and
mounting options (VESA compatible). Note : VESA arms are not included in the LCD TV
set.
C
ONTROL
11 A TV M M S
ONTROL CCESSING THE AIN ENU AND
The TV main menu allows you to access to the Picture, Sound, Features and Install menus.
"
How to call up the main menu
Press the (MENU) button to enter the main menu.
MENU
• PICTURE
The 4 buttons , , and (Cursor Up, • SOUND
• FEATURES
Down, Left and Right) on the remote control allow you
• ▲ É INSTALL
to select the desired menu item, make adjustments and
access the sub-menus. Use the (OSD) button to exit
i
menu from screen.
Before you access the TV installation menu, ensure you are in TV mode. If you are not in TV
20PF7835
mode, press the RADIO/TV (RADIO/TV) button on the remote control to enter into TV mode.
k k
MENU MENU k MENU
INSTALL
Ñ
LANGUAGE
Ñ
• AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
•
1. Enter main menu. 2. Select INSTALL. 3. Enter Install menu.
C T M L
HOOSING HE ENU ANGUAGE AND
A T LCD TV C
UTOMATIC UNING OF HANNELS
The Language menu allows you to set the TV's on-screen menu to be shown in your desired language.
Press Button
Result on Screen
4. Enter LANGUAGE mode.
INSTALL
Ñ LANGUAGE
or 5. Select desired language. • AUTO STORE
•
MANUAL STORE
• SORT
6 Exit LANGUAGE mode. • CHANNEL EDIT
INSTALL •
• LANGUAGE
7. Select AUTO STORE.
AUTO STORE
Ñ
• MANUAL STORE
• SORT
8. Start automatic tuning. •
CHANNEL EDIT
INSTALL
• Ñ •
LANGUAGE
•
AUTO STORE
9. When automatic tuning of channels
i Ñ MANUAL STORE
•
SORT
is completed, exit menu from screen.
•
CHANNEL EDIT
M 17 A LCD TV I
NSTALLATION ENU CCESSING THE NSTALLATION
N LCD TV C
AMING OF HANNELS
This feature allows you to enter a new name or modify an existing name of a channel for 40
programmes including external channels.
MENU k MENU k MENU k INSTALL
Ñ
LANGUAGE
k ▲ Ñ
INSTALL
• AUTO STORE
Ñ •
Ñ LANGUAGE É ENGLISH
• MANUAL STORE
•
AUTO STORE B.MELAYU
• SORT
•
MANUAL STORE
• CHANNEL EDIT
• SORT
•
• CHANNEL EDIT
•
▼ 1. Enter main menu. 2. Select INSTALL. 3. Enter Install menu.
Press Button Result on Screen
Result on Screen
4. Press button repeatedly until
INSTALL
NAME is highlighted. •
AUTO STORE
• MANUAL STORE
INSTALL
• • SORT
LANGUAGE 3
• • CHANNEL EDIT
AUTO STORE 4
•
MANUAL STORE 5 Ñ NAME
•
SORT 6
5. Enter NAME mode.
• INSTALL
Ñ CHANNEL EDIT É 7
• AUTO STORE
or 6. Select desired preset name and press • MANUAL STORE
INSTALL
• SORT
(CURSOR RIGHT) button to store
• LANGUAGE 3
• CHANNL EDIT
• AUTO STORE 4
selected pre-set name. NAME
Ñ
• MANUAL STORE 5
• SORT 6
7. If you select PERSONAL, move INSTALL
CHANNEL EDIT • 7
Ñ É • AUTO STORE
to first character slot
•
MANUAL STORE
INSTALL •
SORT
•
LANGUAGE 3 •
CHANNL EDIT
• AUTO STORE 4
NAME
• MANUAL STORE 5 Ñ
• SORT 6
or 8. Press button repeatedly to cycle through the INSTALL
•
Ñ CHANNEL EDIT É 7 SKIPPED
• AUTO STORE
characters and select desired character. Move •
MANUAL STORE
•
to next character slot by the SORT
•
CHANNL EDIT
(CURSOR RIGHT) button and key in the
NAME
Ñ
next character. (You can enter up to a
maximum of 5 characters) INSTALL
• AUTO STORE
• MANUAL STORE
9. Store named channel.
MENU
• SORT
• CHANNEL EDIT
NAME
Ñ
10. Exit menu from screen.
i
-M
UB ENUS
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
CHANNEL EDIT
▲
• É ENGLISH
B.MELAYU
▼
▲
•
É ENGLISH
B.MELAYU
•
▲
▼
• SEARCH
É
▲
▼
•
É SEARCHING
PLEASE WAIT
CHANNEL FOUND 8
048.31 MHZ
▼
M
ENU
▲
• ENGLISH
É
B.MELAYU
▼
▲
▲
•
É 8
▲
▲
• É PERSONAL
▲
▲
•
É _
▲
▲
•
É BBC_1
▲
▲
• PERSONAL
É