TA-1 & TA-1L Instructions & Manual Specifications TA-1 TA-1L Total Length: 288rnrn Total Length: 380rnrn Spindle to pivot distance: 216mm Spindle to pivot distance: 310mm Stylus to pivot distance: 232mm Stylus to pivot distance: 322mm Overhang 16mm Overhang 12mm Offset angle: 22°...
Page 2
(See the figure) * Screws are not included in this tone arm kit 3) Mount TA-1 shaft through the base hole 3-a) Locate the tonearm shaft through the hole in the arm base and then fasten the screw with wrench.
Page 3
Tracking force ring Counter weight 4) Cartridge tracking force adjustment 4-a) Ensure that the tracking force adjustment knob is set to the zero position. 4-b) With the cartridge permanently fitted in the correct position adjust the counter weight so that the arm is floating with the stylus approx.