Jesco MULTI-LINX MLX Series Installation Instructions Manual

MLX
MULTI-LINX LED Fixture
Modular Linkable Linear Fixture
Please read and save these instructions. Read carefully before using product. Protect yourself and others by observing all
safety information, warnings and cautions. Failure to comply with instructions could result in personal injury and/or damage
to product or property. Please retain instruction sheet for future reference.
Read completely before beginning. If you feel you do not have adequate electrical wiring experience, have this installed by
a qualified licensed electrican.
All electrical connections must be in accordance with local codes, ordinances and the National Electric Code. This product
operates on 120V AC; always confirm the maximum wattage of the linear fixture does not exceed the maximum wattage of
the circuit it is connected to. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified
licensed electrician.
1. Read and follow all safety instructions.
2. Read completely before beginning. If you feel you do not have adequate electrical wiring experience, have this
installed by a qualified licensed electrician.
3. All electrical connections must be in accordance with local codes, ordinances and the National Electric Code.
This product operates on 120V AC; always confirm the maximum wattage of the linear fixture does not exceed the
maximum wattage of the circuit it is connected to. If you are unfamiliar with methods of installing electrical wiring,
secure the services of a qualified licensed electrician.
4. Do not install the linear fixture if any damage is seen on the product or power cables.
5. Prior to starting the installation, disconnect the power by turning off the circuit breaker or removing the appropriate
fuse. (Turning off power using the light switch is not sufficient to prevent electrical shock).
TURN OFF ELECTRICITY
at main fuse box (or circuit breaker box)
before beginning installation by switching
circuit breaker off or removing fuse.
MIN 90º C SUPPLY CONDUCTORS.
MOUNTING OPTIONS
Single or Linearly Connected
Ceiling Mounting with Cables
Single or multiple fixtures connected
linearly. (See page 2)
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Multiple Side-by-Side
Ceiling Mounting with Cables
Multiple fixtures connected side-by-side.
(See page 4)
FOR ELECTRICAL CONNECTION, SEE PAGE 8
www.jescolighting.com
support@jescolighting.com
Tech Support: 855.592.0029
Instruction sheet subject to change without prior notice.
MULTI-LINX
300W MAX
connected run
15 Harbor Park Drive
Port Washington, NY 11050
Main Line: 800.527.7796
Fax Line: 855.265.5768
Designed, Developed and
Assembled in the U .S.A
CONSULT A QUALIFIED ELECTRICIAN TO
ENSURE CORRECT BRANCH CIRCUIT
RATED 120 VOLT AC
20W per 2 feet fixture (15units MAX)
40W per 4 feet fixture (7 units MAX)
80W per 8 feet fixture (3 units MAX)
Surface Mounting with Clips
Single or Multiple fixtures connected
linearly. (See page 7)
219 South 6th Ave
City of Industry, CA 91746
Main Line: 855.654.0110
Fax Line: 626.333.2955 JW 06/14/2017
Page 1 of 8