FIA NP99-28 Installation Instructions

If you have any comments or concerns,
please feel free to contact our
customer service department at:
Toll-free: 1-800-835-0438
OR
Email: info@gofia.com
Thank you for purchasing one of our fine quality products. Your seat cover is engineered from high quality materials and designed
with precision to give you a long-lasting, well-adjusted fit.
INSTRUCTIONS:
1) Remove head rest (see note on reverse)
2) Move seat to most forward position
3) Slip cover over backrest and pull down firmly
1) Position cover on seat to allow seat belt buckles through
opening provided
2) Pass straps through crevice, under seat and buckle to
front
1) Open armrest / storage compartment
2) Center cover under armrest
3) Snug cover at back of armrest so the velcro on the cover
is positioned through the crevice where lid and armrest are
hinged
NOTE: INSTALLATION IS EASIER IF YOU MOVE THE
DRIVER'S SEAT FORWARD
1) Undo seat belt buckle from the elastic loop on seat
2) Center cover on the seat
3) Tuck front of cover between plastic organizer and seat
NOTES:
1) SELF-LOCKING SUPER-GRIP® BUCKLE:
3) RE-INSTALLATION OF HEADRESTS
- Ensure pre-cut holes in seat cover align with holes in base
- Replace headrest
SEAT COVERS
FEATURING
SUPER-GRIP®
THE SLIP RESISTANT FASTENING SYSTEM
INSTALLATION INSTRUCTIONS
NP99-28/ OE39-28/ SL69-28/ SP89-28/ TR49-28/ TRS49-28
A) BACKREST COVERS – "40" PORTIONS:
B) CUSHION COVERS –"40" PORTIONS:
C) BACKREST COVER – "20" PORTION
D) CUSHION COVER –"20" PORTION
BY
FOR
4) Tuck flaps through crevice, under plastic panel and up to
attach to Velcro at back
5) Replace headrests (see note on reverse)
3) Pass side straps through the opening between the molded
plastic and the seat
4) Pass the straps around the back and buckle
5) Adjust straps and buckles to equalize tension
4) Position adhesive back Velcro, supplied, to align with the
velcro on cover
NOTE: BEFORE PLACING VELCRO, CLEAN AREA WITH
ALCOHOL SWAB PROVIDED.
4) Pass side strap around back of seat and buckle
5) Position seat belt buckle through elastic loop on seat cover
6) Adjust straps and buckles to equalize tension
2) HEAD REST REMOVAL:
A) - Insert paper clip into holes at base to release
- Lift off
OR
B) - Push in side release buttons
- Lift off
(If unable to remove consult dealership)