Advertisement
Quick Links
USER MANUAL: FCUSB-1 / FCUSB-3
SINGLE USB CHARGER
Specification of FCUSB-1 / FCUSB-3 single USB charger
The FCUSB-1 / FCUSB-3 charger is intended to charge devices like smartphones, MP3 players and other
electronic equipment. Before connecting the device, check compliance of the charger with
charging parameters of the given device.
Specification
Number of USB ports (type A))
Nominal input voltage
Nominal input current
Nominal output voltage
Nominal output current
Ingress protection degree
Warranty conditions
Warranty is granted for a period of 12 months of the date of purchase. The defective FCUSB-1 / FCUSB-3
charger along with the proof of purchase should be sent to the manufacturer or to the seller. Warranty
does not include mechanical damages, defects resulting from unauthorised repairs and improper use
of the product.
Warranty period will be extended for the duration of the repair.
1
110-240 V~ 50/60Hz
0,25 A
5 V DC
1 A / 2 A
IP 20
1 I 2
Advertisement
Summary of Contents for Karlik FCUSB-1
- Page 1 IP 20 Warranty conditions Warranty is granted for a period of 12 months of the date of purchase. The defective FCUSB-1 / FCUSB-3 charger along with the proof of purchase should be sent to the manufacturer or to the seller. Warranty does not include mechanical damages, defects resulting from unauthorised repairs and improper use of the product.
-
Page 2: Assembly Instructions
ASSEMBLY INSTRUCTIONS 1. Remove the glass panel (1) with the label applying a knife or a flat screwdriver in the recess (3). 2. Remove the screw (2). 3. Dismantle the USB charger module (4). 4. Remove the external frame (5) from the mounting block (6). Pull away block tabs or pull the frame to do this.