Download Print this page

Advertisement

Available languages

Available languages

Quick Links

Safety inStructionS
Please read this operation instruction carefully before use, and keep it for future reference. Producer does not claim responsibility for
damages caused by inappropriate handling and use of the product.
• Appliance for indoor use only. Not for outdoor use.
• Do not use this device near flammables.
• Disconnect from power supply if the device is not going to be used for a long time.
• Never disassemble this device. The device has no user serviceable parts inside. In case of damage, contact authorized service point
for check-up or repair.
• Do not connect/disconnect the device with wet hands.
• Do not use this device if it has been damaged.
• Prevent the device from falling on the ground or being strongly impacted.
• Producer does not guarantee compatibility of the charger with every rechargeable battery.
• Protect this device from humidity, water and other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct
sunlight and other sources of heat.
• Before connecting the device to power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage
in the power supply socket.
• This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in
a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do
not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.
• This product is not a toy; keep it beyond children's reach.
• Always disconnect the product form the power mains before cleaning. Clean this device with a soft, slightly damp cloth. Do not use
any chemical agents to clean this device.
• Important: the charger may heat up during use. It is a normal phenomenon.
operation inStruction
1. Set the power plug at 90º angle from the charger.
2. Tilt the transparent cover with the lever.
3. Place the rechargeable battery under transparent cover (while the cover is still up); connect the tip of one pin to negative pole of
the battery, and the tip of the second pin to positive pole of the battery (adjust the position of the metal pins if necessary). Close the
transparent cover.
4. Connect the charger to power supply mains.
• ML0514
» the POW (power) indicator will light up in red if the charger is connected to power supply mains, or if a rechargeable battery,
which is not completely discharged, is connected to the charger.
» CHG (charging indicator) will blink in red while charging.
» Once the charging is completed, FUL (full) indicator will light up.
• ML0515
» the screen will display battery icon with load level graph if the charger is connected to power supply mains, or if a rechargeable
battery, which is not completely discharged, is connected to the charger.
» Load level graph will blink while charging.
» Once the charging is completed, the battery icon will show 100%.
5. Once the charging process is finished, disconnect the charger from power supply mains and disconnect the rechargeable battery
from charger's pins.
Note: the device has an USB port. After connecting the charger to power supply mains, the device can serve as an AC charger - all you
have to do is connect external device to charger's USB port with an USB cable.
Specification
Input voltage
Output voltage
Max. output current
Max. battery capacity
Suitable for
USB port
Control processor with additional
output voltage stabilization
Foldable power plug
High quality plastic casing
Automatic polarization detection
2 movable pins chargers
LCD display
LED indicators
ML0514
ML0515
AC 100-240 V 50/60 Hz
DC 4,2 V
400 mA
3000 mAh
Lithium-Ion (Li-Ion) and
Lithium Polymer (Li- Poly) 3,6 / 3,7 V
+
+
+
+
+
+
-
+
+
-
english
correct Disposal of this product
(Waste electrical & electronic equipment)
(Applicable in the European Union and other European countries
with separate collection systems) This marking shown on the
product or its literature, indicates that it should not be disposed
with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or
their local government office, for details of where and how they
can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be
mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k.,
ul. Garwolińska 1, 08-400 Miętne.
en
Owner's manual

Advertisement

loading

Summary of Contents for Lechpol ML0514

  • Page 1 2 movable pins chargers conditions of the purchase contract. This product should not be LCD display mixed with other commercial wastes for disposal. LED indicators Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.
  • Page 2 środowiska recyklingu tego produktu użytkownicy tworzywa sztucznego w gospodarstwach domowych powinni skontaktować się z punktem Automatyczne wykrywanie sprzedaży detalicznej, w którym dokonali zakupu produktu, lub z polaryzacji organem władz lokalnych. Użytkownicy w firmach powinni skontaktować się ze swoim dostawcą i sprawdzić warunki umowy zakupu. Produktu nie 2 ruchome piny należy usuwać razem z innymi odpadami komercyjnymi. Wyświetlacz LCD Wyprodukowano w CHRL dla LECHPOL ELECTRONICS Sp. z Wskaźniki LED o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne...

This manual is also suitable for:

Ml0515