Advertisement
Quick Links
GrandVue
RECESS INSTALLATION
FOR SURFACE INSTALLATION, SEE PAGE 3.
READ THE COMPLETE INSTALLATION INSTRUCTIONS BEFORE PROCEEDING WITH INSTALLATION.
INSTALLATION MAY REQUIRE TWO PEOPLE.
INSTALLATION TOOLS
PHILLIPS SCREWDRIVER
C
D
B
D
CONTACT LARSON: 1.888.483.3768 • LARSONDOORS.COM
PATIO ENCLOSURES • GAZEBOS • GARAGE DOORS
INSTALLATION INSTRUCTIONS
MODEL E 90 0, E 9 50
MEASURING TAPE
C
D
A
D
B
POWER DRILL & BITS
NOTE: GrandVue
ordered with the
motorized system will
not include Pullchain.
PART DESIGNATIONS
A
Screen Cassette Assembly
B
Side Guide Rails
C
Recess Mount Clips
D
#8 x 3/4" (19mm) Phillips Pan Head Screw
202220911
PENCIL OR PEN
Advertisement
Summary of Contents for LARSON GrandVue Series
-
Page 1: Installation Instructions
POWER DRILL & BITS PENCIL OR PEN NOTE: GrandVue ordered with the motorized system will not include Pullchain. PART DESIGNATIONS Screen Cassette Assembly Side Guide Rails Recess Mount Clips #8 x 3/4” (19mm) Phillips Pan Head Screw CONTACT LARSON: 1.888.483.3768 • LARSONDOORS.COM... - Page 2 GrandVue RECESS INSTALLATION PA GE 2 SIDE VIEW MOUNTING THE SCREEN CASSETTE DOOR HEAD On a recess installation, the Screen Cassette Assembly will be fastened to the inside top with Recess Mount Clips. Measure how deep into the frame you wish the Cassette Assembly to be installed.
- Page 3 PENCIL OR PEN NOTE: GrandVue ordered with the motorized system will not include Pullchain. PART DESIGNATIONS Screen Cassette Assembly Side Guide Rails #8 x 3/4”(19mm) Phillips Pan Head Screw Surface Mount ‘L’ Clips Screw Covers CONTACT LARSON: 1.888.483.3768 • LARSONDOORS.COM...
- Page 4 GrandVue SURFACE INSTALLATION PA GE 4 MOUNTING THE SCREEN CASSETTE Slide the Surface Mount ‘L’ Clips into the back channel on the top of the Screen Cassette (1A). Using the #8 x 3/4”(19mm) Phillips Pan Head Screws, 6" attach the Mount Clips approximately 6” in from each side.