Advertisement
Quick Links
Tripod Projection Screen Operation Manual
USER MANUAL FOR
TRIPOD SCREEN
PSPSB1
V1.0
PSPS1
Disassembling the screen:
1. Lower the upper section of the tripod.
2. Remove the top supporting rod from the top of the tripod
and lower the screen until it's fully retracted.
3. Hold down the latch and pull the screen out of the socket on
the tripod.
4. Raise the bottom piece then retract the tripod legs.
Maintaining Your Screen:
Keep screen in storage when not in use.
Make sure screen is clean prior to storing it.
Do not fold the screen fabric.
Keep screen surface away from sharp objects.
Use only clear water and clean soft cloth for screen cleaning.
Keep screen surface away from other liquids, smog and chemical.
Keep screen away from high temperature.
Store screen in dry environment.
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA)
Email：supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/JP/AU)
Advertisement
Summary of Contents for Perlesmith PSPSB1
- Page 1 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us. Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) PSPSB1 PSPS1 Email：supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/JP/AU)
- Page 2 Installation and use of the Tripod Screen Tripod Screen overview 1.Remove all contents from the packaging. Please take care as the contents are heavy. 2.Hold the unit firmly upright. 3.Open the tripod legs (1) slightly for stability. 4.Push on the Adjust Key (5), lift the Drop Tube (6) until it clicks.