Related Manuals for Unova Intermec MaxiScan 2100 ST
Summary of Contents for Unova Intermec MaxiScan 2100 ST
- Page 1 Getting Started Guide P/N 3-410049-01 MaxiScan 2100 Fixed Station Scanner Guide de démarrage Guia des primeiros passos Leitfaden ‘Wie starte ich’ Guía de inicio Guida introduttiva...
-
Page 2: Installation
Introduction Installation Getting Started Guide Basic setup Configuración básica Configuration de base Grundkonfiguration Configurazione di base Configuração básica EasySet Full setup EasySet setup software Configuración completa (on the CD-ROM) Configuration complète Vollständige Konfiguration Installation Manual Configurazione completa Configuração completa (on the CD-ROM or to order) Operator’s Guide Operating Utilisation... - Page 3 Keyboard wedge (for PC) QWERTY Swedish / Finnish System power OFF QWERTY Italian Connect cables QWERTY Norwegian Din/mini-Din adaptor cable QWERTY Danish QWERTY Spanish PC wedge cable MaxiScan power ON P/N : 3-414037-00 (if required) QWERTZ Swiss / French Customize parameters (optional) (*) = default value Postamble = Carriage Return System power ON...
- Page 4 RS-232 Customize parameters (optional) (*) = default value System power OFF 9600 baud (*) 19200 baud Connect cables 7 data bits (*) MaxiScan power ON 8 data bits Direct RS-232 cable P/N 0-234032-00 Odd parity Even parity (*) System power ON No parity Postamble = Carriage Return 9600 baud, 7 data bits, even parity, 2 stop bits...
-
Page 5: Online Setup
Symbology Reset Disable all symbologies Select symbology Code 128 / EAN 128 Online setup UPC-A, UPC-E, EAN-8, EAN-13 (UPC-A -> EAN-13) System power OFF Code 39 UPC-A, UPC-E, EAN-8, EAN-13 (UPC-A -> UPC-A) Connect RS-232 cable (P/N : 0-234032-00) Test EAN 13 MaxiScan power ON 1234567890128... -
Page 6: Reading Distance
Reading distance Laser warnings (MaxiScan 2100 ST only) MaxiScan 2100 ST English USA DHHS Standard 21CFR 1040.10 and 1040.11: Class IIa Laser Product 29 cm (11.4’’) IEC 825-1 (1993) EN 60825-1 (1997): Class 1 Laser Product AVOID LONG TERM VIEWING OF DIRECT LASER LIGHT 100% UPC / EAN CAUTION - LASER LIGHT WHEN OPEN - DO NOT STARE INTO BEAM Deutsch... -
Page 7: Regulatory Statements
Regulatory statements Intermec hereby declares that the MaxiScan 2100 has been tested and found compliant with the below listed standards as required by the EMC Directive 89/336/EEC as amended by 92/31/EEC and by the Low Voltage Directive 73/23/EEC as amended by 93/68/EEC: EN50081-1 (1992) EN50082-1 (1998) EN60950 (1993)