Advertisement
Quick Links
CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED
IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
Operating Specifications:
Recommended Electrical Supply Outlet Rating:
Controller Outlet Output Rating:
GROUND-FAULT CURRENT INTERRUPTER (GFCI) type
Outlet shall be a
†
1
INSTALLING TO SINK/DECK/CABINET
Important: Determine location of AIR SWITCH (1). Unit may be
mounted on sink, deck or cabinet face.
sink/deck/cabinet
through-hole
sink/deck/cabinet thickness should no greater than 2-3/8"
Place AIR SWITCH (1) though sink/deck/cabinet
hole
From underside or backside slide WASHER (2) and
NUT (3) onto SHANK (1a); securely tighten NUT
(3)
9610_ii_150901
9610-K10, 9610-K50,
Air Switch for Waste Disposal
Installation Instructions
BY A LICENSED PROFESSIONAL
120V AC @ 15A Min.
120V AC @ 13A (non-inductive) or 1/2 HP ( .373 kW) @ 120V AC
The recommended
shall
be
Maximum
Ø1-1/4".
Ø1-1/4"
& 9610-K80
†
.
Ø1-1/4"
Pg 1
Advertisement
Related Manuals for California Faucets 9610-K10
Summary of Contents for California Faucets 9610-K10
- Page 1 9610-K10, 9610-K50, & 9610-K80 Air Switch for Waste Disposal Installation Instructions CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED BY A LICENSED PROFESSIONAL IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer. Operating Specifications: Recommended Electrical Supply Outlet Rating: 120V AC @ 15A Min.
- Page 2 MOUNTING CONTROLLER Important: Determine location of CONTROLLER (4). location should be near the electrical OUTLET (7) and DISPOSAL CORD (8a) Mount CONTROLLER (4) to side or back wall under sink with two SCREWS (5) (not supplied) Slide TUBE (6) onto air switch OUTLET (1d) and the other end to controller INLET (4a) ...