Download Print this page
Panduit CBH15L50-V6 Installation Instructions Manual
Panduit CBH15L50-V6 Installation Instructions Manual

Panduit CBH15L50-V6 Installation Instructions Manual

Cable cleat for the protection and support of insulted power cables in trefoil arrangement

Advertisement

Quick Links

© Panduit Corp. 2019
Stainless Steel Trefoil Cable Cleat
Cable Cleat for the Protection and Support
of Insulted Power Cables in Trefoil Arrangement
INSTALLATION INSTRUCTIONS
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTALLATION INSTRUCTIONS
BEFORE ATTEMPTING TO INSTALL
NOTE: In the interest of higher quality and value, Panduit products are
continually being improved and updated. Consequently, pictures
may vary from the enclosed product.
NOTE: Updates to this Installation Instructions may be available. Check
www.panduit.com
for the latest version of this manual.
RW316
Rev. 00 [05-
2019]

Advertisement

loading

Summary of Contents for Panduit CBH15L50-V6

  • Page 1 TO REDUCE THE RISK OF INJURY, USER MUST READ INSTALLATION INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL NOTE: In the interest of higher quality and value, Panduit products are continually being improved and updated. Consequently, pictures may vary from the enclosed product.
  • Page 2 Email: Panduit Corp. techsupport@panduit.com USA Technical Support Tel: 800-777-3300 EU Website: www.panduit.com/emea www.panduit.com Panduit Europe • EMEA Service Center EU Email: emeatoolservicecenter Tel: +31 546 580 452 • Fax: +31 546 580 441 @panduit.com Preparing for Order Step Picture Description...
  • Page 3 INSTALLATION INSTRUCTIONS RW316 © Panduit Corp. 2019 Rev. 00 [05-2019] Cable Cleat Nomenclature Fastening Bolt, Washer, and Locknut (Included in Package) Cleat Clamshell Bottom Top Plastic Spacer Securing Bolt, Washer, Cleat Clamshell Top Bottom Plastic Spacer and Locknut Unslotted Ladder Rack/Rung...
  • Page 4 INSTALLATION INSTRUCTIONS RW316 © Panduit Corp. 2019 Rev. 00 [05-2019] Mounting Method 1: Bracket Step Picture Description Measure the cable diameter. Remove top plastic spacer depending on cable diameter. See table on page Insert bracket into slot in lower plastic spacer of cable cleat.
  • Page 5 INSTALLATION INSTRUCTIONS RW316 © Panduit Corp. 2019 Rev. 00 [05-2019] Rotate swing bolt until the carriage head rests within the matching opening in the top of the bracket. Tighten flange nut to 60 in-lbs [6.8Nm]. Open top clamshell and place trefoil cables in the opening in a trefoil configuration.
  • Page 6 INSTALLATION INSTRUCTIONS RW316 © Panduit Corp. 2019 Rev. 00 [05-2019] Mounting Method 2: Bolt Step Picture Description Remove top plastic spacer to allow access to the bolt hole. Position cleat over the appropriate hole in the rung. Assemble securing carriage bolt through the hole in the bottom of the cleat.
  • Page 7 INSTALLATION INSTRUCTIONS RW316 © Panduit Corp. 2019 Rev. 00 [05-2019] Measure the cable diameter. Remove top plastic spacer depending on cable diameter. See table on page Open top clamshell and place cables in the opening in a trefoil configuration. Close top clamshell around the cables.
  • Page 8 INSTALLATION INSTRUCTIONS RW316 © Panduit Corp. 2019 Rev. 00 [05-2019] Spacer Decision Table Part Number Cable Use Top Discard Top Range Spacer Spacer 20 – 25mm 20 – 22.5mm 22.5 – 25mm CCSSTR2025-X 23 – 28mm 23 – 25.5mm 25.5 – 28mm CCSSTR2328-X 26 –...

This manual is also suitable for:

Cbh20l50-v6Cbh25l50-v6Cbh30l50-v6