Advertisement
Quick Links
STEP BY STEP INSTALLATION INSTRUCTIONS
FOR ALL DESIGNER SERIES
KITCHEN WASTE & LAUNDRY UNITS
For further assistance in New Zealand
www.tanova.co.nz or www.fit-nz.co.nz or contact Fit 0800 852 258
For further assistance in Vict, SA & Tas, contact 1300 121 800
For further assistance in NSW, QLD, NT, ACT and WA, contact 1300 222 600
www.tanova-nz.com
Use in conjunction with full size template supplied with your unit
Advertisement
Summary of Contents for Tanova TDS30
- Page 1 KITCHEN WASTE & LAUNDRY UNITS For further assistance in New Zealand www.tanova.co.nz or www.fit-nz.co.nz or contact Fit 0800 852 258 For further assistance in Vict, SA & Tas, contact 1300 121 800 For further assistance in NSW, QLD, NT, ACT and WA, contact 1300 222 600 www.tanova-nz.com...
- Page 2 DESIGNER SERIES INSTALLATION INSTRUCTIONS USE IN CONJUNCTION WITH THE FULL SIZE TEMPLATE SUPPLIED WITH YOUR UNIT STEP 1 RUNNER POSITIONS are on each short end of the template provided, marked 1 RHF and 1 LHF 1. Hold Template against the underside of the cabinet top rail and 1 RHF flush with the right-hand cabinet side, and mark runner fixing positions as shown on template.
- Page 3 STEP 3 10. Loosen lock off screw, access sideways and height adjustment screws through the side of the drawer. Drawer Front - Side Adjustment To right To left Adjustable by 1.25mm to the right Adjustable by 1.25mm to the left Drawer Front - Height Adjustment ±1.8mm Loosen...
- Page 4 TEMPLATE DIMENSIONS HIGHSIDE TDS30 212mm 308mm 340mm 338mm 118.5mm TDS35H 252mm 348mm 380mm 378mm 143.5mm TDS40 212mm 308mm 340mm 338mm 168.5mm TDS40-C 252mm 348mm 380mm 378mm 168.5mm LAUNDRY TDS35L 134mm 230mm 262mm 259mm 143.5mm TDS40L 125mm 221mm 253mm 251mm 168.5mm...