Advertisement
Quick Links
Operating Instructions & Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Floating Pond Pump System
Models FPS0501 and SPS0501
Description
This pump system is designed for decorative use and can
improve water aeration. It produces water fountains up to 15'
in height, and up to 4,900 gallons of water per hour. Make
your floating fountain system even more dramatic at night by
adding the NightBright lighting system 023069.
Operates in 5 feet of water or deeper.
General Safety Information
Carefully read and follow all safety instructions in this
manual and on pump. Keep safety labels in good condi-
tion. Replace missing or damaged safety labels.
This is a SAFETY ALERT SYMBOL. When you see
this symbol on the pump or in the manual, look for one of
the following signal words and be alert to the potential for
personal injury or property damage.
DANGER
Warns of hazards that WILL cause serious
personal injury, death or major property damage if ignored.
95 North Oak St. • Kendallville, IN 46755 • 800-742-5044 • © 2018 All rights reserved.
Unpacking
When unpacking the unit, inspect carefully for any damage
that may have occurred during transit.
Warns of hazards that CAN cause serious
personal injury or death, if ignored.
Warns of hazards that MAY cause minor
personal injury, product or property damage if ignored.
IMPORTANT: Indicates factors concerned with operation,
installation, assembly or maintenance which could result in
damage to the machine or equipment if ignored.
NOTE: Indicates special instructions which are important but
are not related to hazards.
1
021626 C
Advertisement
Related Manuals for Flint & Walling FPS0501
Summary of Contents for Flint & Walling FPS0501
- Page 1 Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. Floating Pond Pump System Models FPS0501 and SPS0501 Description Unpacking When unpacking the unit, inspect carefully for any damage This pump system is designed for decorative use and can that may have occurred during transit.
- Page 2 DANGER DANGER Never enter the water Always use caution when either wading, swimming or in a boat with the operating electrical controls in damp areas. pump power on, as this may result in severe If possible, avoid all contact with electrical electrical shock.
- Page 3 6. Before connecting the unit to the power receptacle, check to insure there is no leakage to ground. This can be done by using an ohm meter and setting the scale to its highest setting (i.e. Rx100K). Connect one ohmmeter lead to the unit power cord ground (round prong) and to one of the flat prongs.
- Page 4 2(A/B/C) TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CORRECTIVE ACTION CAUSES Unit won’t Circuit break- Reset circuit breaker er tripped GFI Tripped Reset GFI No or low Blocked Disconnect power. Clean screen spray screen or and/or nozzle. Check that o-ring is nozzle, miss- undamaged and seated in groove.