Download Print this page

Jesco CH-FX-41 Installation Instructions

Advertisement

Quick Links

CH-FX-41 & CH-FX-41-FR
FIXTURE CHANNEL
FIXTURE CHANNEL WITH FROSTED LENS
CHANNEL & CHANNEL SET FOR INFINA
Please read and save these instructions. Read carefully before using product. Protect yourself and others by observing all safety information,
warnings and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain
instruction sheet for future reference.
REQUIRED USE OF STATIONARY AND PORTABLE POWER TOOLS
accessories. Always wear safety goggles or safety glasses with side shields complying with current national standards, and a full face shield
when needed.
OUTDOOR USAGE
The plastic lens cover has a UV inhibitor molded in. While it can prevent yellowing for a period of time, long time exposure in the outdoor
environment will eventually degrade the UV inhibitors, causing the lens to turn yellow and become brittle.
lose its rigidity to grab hold onto the aluminum channel.
The combined usage of the aluminum channel and plastic lens in an outdoor environment can lead to undesired results, such as built up of
dirt, insects, and mold. Moisture can also be trapped within the channel causing water to puddle up inside which void product's warranty.
TOOLS REQUIRED
MITER SAW
HARDWARE INCLUDED WHEN PURCHASED WITH
CH-FX-41-LEC & CH-FX-41-DEC END CAPS
ENDCAP MOUNTING SCREWS
ADDITIONAL STEPS FOR FACE DOWN & OUTDOOR INSTALLATIONS WITH DL-AC-FLEX-MC-M ON PAGE 3
INSTALLATION INSTRUCTIONS
POWER DRILL
CH-FX-41
ANODIZED ALUMINUM CHANNEL
DL-AC-FLEX-MC-M
SNAP-IN METAL MOUNTING U-CLIP
DL-AC-FLEX
INFINA AC LED STRIP
www.jescolighting.com
support@jescolighting.com
Tech Support: 855.592.0029
Instruction sheet subject to change without prior notice.
1/8" DRILL BIT
PHILLIPS BIT
HARDWARE REQUIRED (NOT INCLUDED)
CHOOSE SCREW TYPE TO BEST MOUNT THE
CHANNEL TO THE INTENDED MOUNTING SURFACE
Recommended:
#6-20 x 1" PHILLIPS
STAINLESS STEEL FLAT HEAD
SELF TAPPING SCREWS
15 Harbor Park Drive
Port Washington, NY 11050
Main Line: 800.527.7796
Fax Line: 855.265.5768
MINI PHILLIPS SCREWDRIVER
#6-20 x 1/4" PHILLIPS
STAINLESS STEEL FLAT HEAD
SELF-TAPPING SCREWS FOR
INSTALLATION WITH
DL-AC-FLEX-MC-M
219 South 6th Ave
City of Industry, CA 91746
Main Line: 855.654.0110
Fax Line: 626.333.2955
JW 04012019
Page 1

Advertisement

loading

Summary of Contents for Jesco CH-FX-41

  • Page 1 MITER SAW POWER DRILL MINI PHILLIPS SCREWDRIVER HARDWARE INCLUDED WHEN PURCHASED WITH HARDWARE REQUIRED (NOT INCLUDED) CH-FX-41-LEC & CH-FX-41-DEC END CAPS CHOOSE SCREW TYPE TO BEST MOUNT THE CHANNEL TO THE INTENDED MOUNTING SURFACE Recommended: ENDCAP MOUNTING SCREWS #6-20 x 1” PHILLIPS #6-20 x 1/4”...
  • Page 2 CH-FX-41 & CH-FX-41-FR FIXTURE CHANNEL FIXTURE CHANNEL WITH FROSTED LENS CHANNEL & CHANNEL SET FOR INFINA INSTALLATION INSTRUCTIONS WITH 3M VHB DOUBLE SIDED TAPE SUITABLE FOR INDOOR APPLICATIONS ONLY, EXCLUDING FACE DOWN APPLICATIONS 1/8” 18” Stretch out and line up INFINA next to channel set with FOR FACE DOWN AND OUTDOOR APPLICATIONS, SEE PG3 lens cover installed.
  • Page 3 FOLLOW STEP 1 ON PG2 ON CUTTING CHANNEL TO SIZE BEFORE PROCEEDING TO BELOW INSTRUCTIONS can be used together in the same installation can be used in place of FOR CH-FX-41-FR LENS INSTALLATION, FOLLOW STEP 4 & 5 ON PG2 AFTER INFINA® IS MOUNTED INSTALL MOUNTING CLIP TO CHANNEL 1/8”...

This manual is also suitable for:

Ch-fx-41-fr