Olympia B-8170 Installation And Maintenance Instructions

MAINTENANCE AND CARE INSTRUCTIONS
Olympia products are designed and engineered under strict quality standards. Regular and proper care of our
products will ensure years of trouble free service. To clean, simply wipe with a damp, soft cloth. Do not use
abrasive or harsh cleaners as they may result in finish damage. Regularly remove and clean minor debris from
the aerator.
TROUBLE SHOOTING
A. If water leaks from the spout outlet: 1.
2.
3.
4.
5.
B. If faucet has low flow: 1.
2.
C. If water leaks from spout bonnet nuts: 1.
2.
3.
OLYMPIA FAUCETS, INC. LIMITED LIFETIME WARRANTY *
Olympia Faucets, Inc. warrants its products to the original consumer purchaser to be free from defects in material
and workmanship as long as the consumer purchaser owns it. Dated proof of purchase must accompany all war-
ranty claims. PVD finishes carry a lifetime warranty in residential service.
Olympia Faucets, Inc. will replace, free of charge, to the original consumer purchaser, any and all parts that
prove defective under normal installation, use, and service. Damage as a result of misuse, abuse, accident, or
improper installation, will consequentially void this warranty. Replacement parts can be obtained from your local
dealer or directly from Olympia Faucets. Olympia Faucets, Inc. recommends using a certified plumber for all
faucet installation and repair.
This warranty is limited to replacement of defective parts only. Incidental and consequential damages, labor
charges, repair, or replacement costs are expressly excluded. Some states do not allow the exclusion or limita-
tion of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives
you specific legal rights, as you may have other rights of which vary from state to state.
Installation or maintenance and cleaning must be in compliance with instructions furnished with every Olympia
product. If you find a problem with your product, please immediately contact your nearest Olympia Faucets, Inc.
dealer or sales representative.
* 2 year limited warranty on commercial and multi-family projects.
Shut off both hot and cold water supplies.
Remove handles (A), bonnet nuts (B), and cartridges (C).
Check and replace springs and seats (D).
Reassemble handles (A), bonnet nuts (B), and cartridges
(C).
If seepage still occurs, replace cartridges (C).
Remove Aerator (3), clean all internal debris and tighten
Aerator (3) back.
Repeat Trouble Shooting 'A' and clean any debris trapped in
the seats and springs (E).
Shut off both hot and cold water supplies.
Unscrew spout bonnet nut (4) and gently pull off spout(I-I2).
Replace O-rings (6), and carefully reassemble spout(I-I2).
INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR OLYMPIA TWO HANDLE
BAR FAUCET
THIS PRODUCT MEETS THE FOLLOWING STANDARDS: ASME A112.18.1 ~ ANSI
A117.1 ~ ANSI / NSF 61, SECTION 9 ~ UPC / IAPMO LISTED / ADA COMPLIANT ~
COMPLIES WITH CALIFORNIA LEAD PLUMBING LAW
PRODUCT NUMBERS
#B-8170 5-1/4" Reach Gooseneck Spout
#B-8180 3-1/2" Reach Gooseneck Spout
#B-8190 Hi-Rise Spout
ADA
Olympia Faucets, Inc. © 2009