Download Print this page

Parker Laboratories Thermasonic Series Operating Instructions

Gel warmer

Advertisement

Quick Links

Warm and comfortable is now even better.
5. TECHNICAL SPECIFICATIONS
This equipment is intended for indoor use and will meet its performance
figures within the ambient temperature range of 68°F (20°C) to 95°F (35°C),
with maximum relative humidity of 80% (non-condensing). Installation
Category II (transient voltages). Pollution Degree 2, in accordance with
EN 60664-1. Suitable for operation at altitudes of up to 6,500 feet.
Specifications:
Supply Voltage Range:
120V~ +/- 10%, 50/60 Hz
230V~ +/- 10%, 50/60 Hz (CE version)
Power Rating:
Model 83-20: 36W, 0.28-0.35A
Model 83-20-20: 36W, 0.15-0.18A
Temperature Tolerance:
Heating Well ± 2°C
6. MAINTENANCE AND SERVICE
No routine maintenance is required and there are no user-serviceable
parts.
6.1 CLEANiNg
Disconnect the Gel Warmer from the electrical outlet prior to cleaning.
Allow the unit to cool. The Gel Warmer may be cleaned by using a soft
damp cloth and a mild detergent, or a hospital grade disinfectant product
from Parker Laboratories. Do not allow the electronic controls to get wet.
Do not use an abrasive cleaner or isopropyl alcohol to clean the Gel
Warmer. Do not submerge or immerse the Gel Warmer in water.
7. WARRANTY
The Thermasonic Gel Warmer has a two-year Limited Warranty from date of
purchase. DO NOT attempt to service your Thermasonic gel Warmer.
Any evidence of the unit being disassembled, tampered with, or misused will
void the warranty. Contact Parker Laboratories, Inc. with any service or
warranty questions through email: parker@parkerlabs.com
NOTE: Product must be registered online at time of purchase.
Please register your model at:
www.parkerlabs.com/register/thermasonic
8. FREQUENTLY ASKED QUESTIONS
This instruction manual contains the answers to most questions about the use
and care of your Thermasonic Gel Warmer. You may also find answers to
some of the most frequently asked questions by visiting:
www.parkerlabs.com/thermasonic
Manufacturer's Name:
Parker Laboratories, Inc.
Manufacturer's Address:
286 Eldridge Road,
Fairfield, NJ 07004 USA
This model conforms to the requirements
Name: THERMASONIC
of the following European Directives:
Model: 83-20, 83-20-20
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
Conforming to the following standards:
EN 60335-2-15:2016
EN 60335-1:2012+A11:2014
EN 55014-1:2017
EN 55014-2:2015 
EN 61000-3-2:2014 
EN 61000-3-3:2013
EN 62233:2008
EN 60664-1:2007
Parker Laboratories, inc.
www.parkerlabs.com
Warming Up Ultrasound
© 2019 Parker Laboratories, Inc. All Rights Reserved.
® Thermasonic is a registered trademark of Parker Laboratories, Inc.
® Microtemp is a registered trademark of Emerson Electric Co.
the
Thermasonic
Warm and comfortable is now even better.
®
Gel Warmer
Operating Instructions
For Model: 83-20 (120V)
For Model: 83-20-20 (230V)
PM-082-0005A
®
Gel Warmer

Advertisement

loading

Summary of Contents for Parker Laboratories Thermasonic Series

  • Page 1 Allow the unit to cool. The Gel Warmer may be cleaned by using a soft damp cloth and a mild detergent, or a hospital grade disinfectant product from Parker Laboratories. Do not allow the electronic controls to get wet. Do not use an abrasive cleaner or isopropyl alcohol to clean the Gel Warmer.
  • Page 2 Warm and comfortable is now even better. the Thermasonic® Gel Warmer the Thermasonic® Gel Warmer 4. OPERATION 1. IMPORTANT SAFEGUARDS 2. INCLUDED IN PACKAGE 4.1 SETTiNg ThE OPERATiNg TEMPERATURE when indicated on the equipment means: CAUTION This symbol 2. INCLUDED IN PACKAGE Read these operating instructions fully before use and pay the Thermasonic®...

This manual is also suitable for:

Thermasonic 83-20Thermasonic 83-20-20