Imtra LIM80110 Reference Manual

PowerLED Dimming Control
Reference Manual
ILIM80110

Imtra PowerLED Dimmer
(see page 3)
ILIM80102

Captiva PowerLED Dimmer
(see page 4)
ILIM80200

PowerLED Analog Dimmer
(see page 5)
PWM Control of PowerLED Lights

thru a centralized lighting control
system
(see page 6)
Overview
In order to provide control of our PowerLED lighting fixtures to support
various lighting applications, Imtra offers a range of dimming control
solutions.
For typical applications, an ILIM80110 dimmer module may be used with
any number of normally open momentary pushbuttons to control up to 30*
PowerLED lights.
Lighting circuits that include one or more Captiva PowerLEDs require an
ILIM80102. This dimmer module can also be controlled by any number of
normally open momentary pushbuttons and it can control up to 50*
PowerLED lights.
For applications where it is necessary to integrate with a third party
automated control system, one of two solutions may be employed.
1. A 0-10V analog signal may be used to control the PowerLEDs via
our ILIM80200 dimmer module. This dimmer module requires a 0-
10V analog signal source and can control up to 30* PowerLED
lights.
2. A Pulse Width Modulating signal may be used to control the
PowerLEDs directly via the white and grey dimming signal wires.

Specifications

Height
Width
Depth
Input Voltage Range
Max. Output Current
Capacity
Control Interface
IP Rating
*Note: Exceeding maximum number of fixtures can permanently damage
dimmer module.
1 2
ILIM80110 ILIM80102
0.90" (23mm) 0.84"(21mm)
3.86" (98mm) 2.53"(64mm)
2.10" (52mm) 1.47"(37mm)
10-30VDC
0.03A 0.05A
30 Fixtures* 50 Fixtures*
N.O. Contacts N.O. Contacts
IP40
ILIM80200
0.63" (16mm)
2.63" (67mm)
1.38" (35mm)
0.03A
30 Fixtures*
0-10V Analog