Page 1
Butterfly valve series BSV The butterfly valves of the series BSV are DVGW ap- proved to the Norm EN 161 with product identi- fication number. They are suitable to be used on residential and in- dustrial combustion systems. They are particularly suitable for both manual and automatic control of gases belonging to the first, second and third family and of air.
Page 2
FLOW CHART Molle di taratura pressione (m3/h) Aria dv=1 Metano dv=0,64 Methane Gas di città dv=0,45 Town gas Propano dv=1,56 Propane Butano dv=2,09 Butane G.P.L. dv=1,70 L.G.P. MODELS MODEL Connection Orifice diameter (mm) Manual control Free sharft BSV20.A BSV20.B BSV25/20.A BSV25/20.B BSV25.A BSV/25.B...
Page 3
DIMENSIONS Dimensions in mm Weight Kg Rp 3/4 98,5 42,4 Rp 1 98,5 42,4 Rp 1.1/4 128,5 70,7 Rp 1.1/2 128,5 70,7 Rp 2 128,5 70,7...
Page 4
When installing the valve be sure that there is sufficient clearance above the gear cover and that it can be easily accessible in order to perform manual servicing, automatic servicing by means of a gear motor or servicing by means of levers. For the valves of the BSV series proceed as follows: remove the protection plugs from the threaded flanges, screw the threaded flanges to the inlet and outlet pipes, using exclusively sealing materials suitable for gases, insert the BSV valve between the two flanges with “O”...
This manual is also suitable for:
Bsv25/20.aBsv20.aBsv25.aBsv32/25.aBsv32/20.aBsv40/25.a...
Show all