Advertisement
Quick Links
Advertisement
Summary of Contents for Quooker Nordic Square
- Page 1 Installation guide Nordic mixer taps Before installing read this guide first...
- Page 2 The Twintaps are available in two styles. The Nordic Round Twintaps have a curved spout and the Nordic Square Twintaps have a square spout. Both styles are available in a chrome or brushed chrome finish.
-
Page 3: Contents Of The Pack
Contents of the pack Nordic Square mixer tap or Nordic Round mixer tap 2 Hot and cold water inlet hoses and two inlet hose screens 3 Brass fixing plate, fixing nut, black plastic insert (for 35 mm hole), black rubber washer... - Page 4 Drilling hole • The images below offer some advice on where to best position the mixer tap. • The Nordic mixer taps have a reach of 22.5 cm from the centre of the tap hole – keep this in mind when choosing the tap position. Boiling-water tap Mixer tap 1 Drilling hole...
- Page 5 Position the brass fixing plate around the hoses. Screw the fixing nut onto the tap thread. Adjust the position of the tap to ensure that the Quooker logo is facing the user. When the handle is in the cold position, it will be parallel to the edge of the work top.
- Page 6 To open the tap pull the handle upwards. The further you pull, the more water will be released. 3 Rotating spout The chrome-finished Nordic Square has a rotating spout you can use to clean your sink. 4 Adjusting tap handing...
-
Page 7: Maintenance
Maintenance • In hard water areas we recommend cleaning the tap nozzle of the mixer tap regularly. The tap nozzle has been fitted with a rubber insert which will allow you to easily wipe away any limescale without removing the nozzle. The tap itself can be cleaned with a soft cloth and mild (non-acidic), nonabrasive soap. - Page 8 Quooker Emirates LLC Indigo Central 2, Al Safa 2 Sheik Zayed Road PO Box 391161, Dubai (UAE) Telephone +971 (0)4 330 3063 info@quooker.ae quooker.ae...