WARRANTY Danver warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers five years from date of original purchase. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included.
Page 4
ASSEMBLY: Frame Mounting Select the drawing for the size/model purchased. Note: Use the supplied sheet metal screws to attached to wall studs whenever possible. If wall studs are not available, install using metal wall anchors. 16.00 18.00 Shelf Length 16.00 4.00 24.00 Shelf Length...
Page 6
ASSEMBLY: Shelf Frame 1. Drill holes in the appropriate location, based on the measurements for the size/model purchased. 1/8” Drill Optional bit for sheet metal screws. 3/8” Drill bit for wall anchor screws. Shelf Frame Note: Ensure that the holes are drilled level. 2.
Page 7
ASSEMBLY: Bracket For the 60 and 72” shelves, it is recommended that you use the supplied center Bracket. 1. After the Shelf Frame is mounted, slide the supplied center Bracket in between the Shelf Frame. 5/8" 2. Slide the center Bracket into place, leaving a approximate gap of 5/8”...