Contents Installation Technical Specifications Safety & Care Information Warranty Information Contact Us...
Page 3
4. Transformer 5. Demister connection The Ablaze Premium Back-Lit Mirror models in this guide are designed to be concealed wired (hardwired) through the back of the mirror and wired into a separate switch, timer or PIR movement sensor. The Ablaze Premium Back-Lit Mirrors come in two parts: the mirror with hangers and demister attached and the backbox containing the lights and transformer.
Installation You will be installing the Ablaze Back-Lit Mirror as part of a high voltage mains electrical circuit. To ensure your safety and to protect the mirror, switch off the mains power before you start the installation. The Ablaze Back-Lit Mirrors require mains supply and a switch/timer/PIR movement sensor.
Technical Specifications SS759C Cool W900 x H750 x D43 H / V SS128C Cool W1200 x H800 x D43 H / V RS600C Cool 600 ø x D43 RS600W Warm 600 ø x D43 RS900C Cool 900 ø x D43...
Safety & Care Information Ablaze Back-lit Mirrors should be installed and tested by a qualified electrician and in accordance with current local regulations. Where possible the Ablaze Back-Lit Mirror should be screwed into studs or other suitable dry wall anchors, if fixing to hollow walls suitable anchors should be used.
Warranty Information Thermogroup covers all its products with a satisfaction guarantee. In addition, Thermogroup will supply a replacement product where a fault is shown to be caused by manufacture, materials or workmanship providing the goods have been installed correctly and according to installation instructions. This guarantee does not include removal, freight or installation costs.