Advertisement
Quick Links
Pack Contents
·
Touch Glass Alerter (TGA)
·
2 x AA Battery
·
3 x Double Sided Sticky Pads
·
1 x Cleaning Sachet
Product Overview
The TGA is a wireless doorbell alerter that uses radio frequency (RF) technology to activate a separate door
chime unit (not supplied with this package), with the TGA acting as the transmitter and the door chime unit as the
receiver. There are over 250 RF channels that the TGA and door chime unit can operate on and the units come
supplied with a standard default factory channel setting. Channel settings can easily be changed and further
details on this process can be found in the Channel Set up and Additional TGA Units section.
The TGA has been designed to be attached to the inside of the designated glass door or window and activated
from the outside of that position, simply by swiping the hand across the 'Touch Here for Assistance' panel. Once
the panel has been swiped then the TGA transmits the signal to the door chime receiver and the chime will
activate.
Please read and follow the instructions below before attempting to activate or install your additional TGA with
your existing door chime. It is recommended that you retain a copy of these instructions for future use.
Initial Set up Instructions
1. Check the contents of the pack and ensure all components listed are present. Contact your suppliers if
anything is missing.
2. This TGA is designed to be installed along side one or more existing TGA units to cover more than one
entrance. Therefore before fitting the additional TGA please follow the instructions as detailed in the
Adding additional TGA to chime section.
3. With a successful pairing of the additional device, you may proceed with the fitting of the new TGA as
described below. Should the units not pair, please follow the instructions shown in the To reset section.
If this process fails to pair the devices, please refer to the Trouble Shooting Guide and User Hints
section.
Please note the TGA has a built in anti-annoyance feature that restricts the activation of the device, please read
the
Operation section
for more details.
Touch Glass Alerter (Without Chime)
Models Covered: 250-010 & 250-050
Advertisement
Summary of Contents for Pace Systems 250-050
- Page 1 Touch Glass Alerter (Without Chime) Models Covered: 250-010 & 250-050 Pack Contents · Touch Glass Alerter (TGA) · 2 x AA Battery · 3 x Double Sided Sticky Pads · 1 x Cleaning Sachet Product Overview The TGA is a wireless doorbell alerter that uses radio frequency (RF) technology to activate a separate door chime unit (not supplied with this package), with the TGA acting as the transmitter and the door chime unit as the receiver.
- Page 2 Additional TGA Units can be purchased and installed at other locations i.e.. other entrances etc. They can be adjusted to a different tone so that the source of the chime can be identified. Additional units can be obtained from your retailer or from Pace Systems Ltd Telephone: 0800 0885861 Adding additional TGA to chime Press the ‘CODE’...
- Page 3 Positioning and Fixing the TGA The position of the TGA on the glass window/door must be carefully chosen (Please see places to be avoided) It is recommended that before permanently attaching the TGA to the glass, first test the operation of the unit in the chosen location, ensuring the TGA can be activated through the glass and the chime unit sounds.
- Page 4 This unit is guaranteed against faulty parts or workmanship for a period of one year from date of purchase. This Warranty does not cover batteries, damage caused by battery leakage, damage caused by incorrect installation, or physical damage to the casing. This guarantee does not affect your statutory rights Pace Systems Limited Tel. 0800 0885861 www.pace-systems.co.uk...